Datenblatt-pdf.com


LM311B Schematic ( PDF Datasheet ) - NXP Semiconductors

Teilenummer LM311B
Beschreibung Voltage comparator
Hersteller NXP Semiconductors
Logo NXP Semiconductors Logo 




Gesamt 4 Seiten
LM311B Datasheet, Funktion
Philips Semiconductors Linear Products
Voltage comparator
Product specification
LM111/211/311/
LM311B
DESCRIPTION
The LM111 series are voltage comparators that have input currents
approximately a hundred times lower than devices like the µA710.
They are designed to operate over a wider range of supply voltages;
from standard ±15V op amp supplies down to a single 3V supply.
Their output is compatible with RTL, DTL, and TTL as well as MOS
circuits. Further, they can drive lamps or relays, switching voltages
up to 50V at currents as high as 50mA.
Both the inputs and the outputs of the LM111 series can be isolated
from system ground, and the output can drive loads referred to
ground, the positive supply, or the negative supply. Offset balancing
and strobe capability are provided and outputs can be wire-ORed.
Although slower than the µA710 (200ns response time vs 40ns), the
devices are also much less prone to spurious oscillations. The LM111
series has the same pin configuration as the µA710 series.
FEATURES
Operates from single 3V supply (LM311B)
Maximum input bias current: 150nA (LM311—250nA)
Maximum offset current: 20nA (LM311—50nA)
Differential input voltage range: ±30V
Power consumption: 135mW at ±15V
High sensitivity—200V/mV
Zero crossing detector
PIN CONFIGURATION
D, FE, N PACKAGES
GND 1
INPUT 2
INPUT 3
V– 4
+
8 V+
7 OUTPUT
6 BAL/STROBE
5 BALANCE
APPLICATIONS
Precision squarer
Positive/negative peak detector
Low voltage adjustable reference supply
Switching power amplifier
ORDERING INFORMATION
DESCRIPTION
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Small Outline Package (SO)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Small Outline Package (SO)
8-Pin Ceramic Dual In-Line Package (CERDIP)
8-Pin Plastic Small Outline Package (SO)
8-Pin Plastic Dual In-Line Package (DIP)
TEMPERATURE RANGE
-55°C to +125°C
-25°C to +85°C
0 to +70°C
0 to +70°C
-25°C to +85°C
-55°C to +125°C
0 to +70°C
0 to +70°C
ORDER CODE
LM111N
LM211N
LM311D
LM311N
LM211D
LM111FE
LM311BD
LM311BN
DWG #
0404B
0404B
0174C
0404B
0174C
0580A
0174C
0404B
August 31, 1994
273 853-0927 13721





SeitenGesamt 4 Seiten
PDF Download[ LM311B Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
LM311Single ComparatorsON Semiconductor
ON Semiconductor
LM311Single ComparatorFairchild Semiconductor
Fairchild Semiconductor
LM311Voltage comparatorNXP Semiconductors
NXP Semiconductors
LM311Voltage ComparatorNational Semiconductor
National Semiconductor
LM311Voltage comparatorSTMicroelectronics
STMicroelectronics

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche