Datenblatt-pdf.com


LM2990J-12-QML Schematic ( PDF Datasheet ) - National Semiconductor

Teilenummer LM2990J-12-QML
Beschreibung Negative Low Dropout Regulator
Hersteller National Semiconductor
Logo National Semiconductor Logo 




Gesamt 12 Seiten
LM2990J-12-QML Datasheet, Funktion
June 1999
LM2990
Negative Low Dropout Regulator
General Description
The LM2990 is a three-terminal, low dropout, 1 ampere
negative voltage regulator available with fixed output volt-
ages of −5, −5.2, −12, and −15V.
The LM2990 uses new circuit design techniques to provide
low dropout and low quiescent current. The dropout voltage
at 1A load current is typically 0.6V and a guaranteed
worst-case maximum of 1V over the entire operating tem-
perature range. The quiescent current is typically 1 mA with
1A load current and an input-output voltage differential
greater than 3V. A unique circuit design of the internal bias
supply limits the quiescent current to only 9 mA (typical)
when the regulator is in the dropout mode (VOUT − VIN 3V).
Output voltage accuracy is guaranteed to ±5% over load,
and temperature extremes.
The LM2990 is short-circuit proof, and thermal shutdown in-
cludes hysteresis to enhance the reliability of the device
when overloaded for an extended period of time. The
LM2990 is available in a 3-lead TO-220 package and is rated
for operation over the automotive temperature range of
−40˚C to +125˚C.
Features
n 5% output accuracy over entire operating range
n Output current in excess of 1A
n Dropout voltage typically 0.6V at 1A load
n Low quiescent current
n Internal short circuit current limit
n Internal thermal shutdown with hysteresis
n Functional complement to the LM2940 series
Applications
n Post switcher regulator
n Local, on-card, regulation
n Battery operated equipment
Typical Application
DS010801-1
*Required if the regulator is located further than 6 inches from the power supply filter capacitors. A 1 µF solid tantalum or a 10 µF aluminum electrolytic
capacitor is recommended.
**Required for stability. Must be at least a 10 µF aluminum electrolytic or a 1 µF solid tantalum to maintain stability. May be increased without bound to
maintain regulation during transients. Locate the capacitor as close as possible to the regulator. The equivalent series resistance (ESR) is critical, and
should be less than 10over the same operating temperature range as the regulator.
Ordering Information and Connection Diagrams
Temperature
Range
−40˚C to
+125˚C
−55˚C to
+125˚C
-5.0
LM2990T-5.0
LM2990S-5.0
LM2990J-5.0-QML
5962-9571101QEA
LM2990WG5.0-QML
5962-9571101QXA
Output Voltage
-5.2 -12
LM2990T-5.2
LM2990T-12
LM2990S-12
LM2990J-12-QML
5962-9571001QEA
-15
LM2990T-15
LM2990S-15
LM2990J-15-QML
5962-9570901QEA
Package
TO-220
TO-263
J16A
WG16A
© 1999 National Semiconductor Corporation DS010801
www.national.com






LM2990J-12-QML Datasheet, Funktion
Typical Performance Characteristics (Continued)
LM2990-5 and LM2990-5.2
Ripple Rejection
LM2990-5 and LM2990-5.2
Output Impedance
Maximum Output Current
DS010801-25
LM2990-12 and LM2990-15
Ripple Rejection
DS010801-26
LM2990-12 and LM2990-15
Output Impedance
DS010801-27
Maximum Output Current
Maximum Power
Dissipation (TO-220)
DS010801-28
DS010801-29
Maximum Power Dissipation
(TO-263) (See (Note 3))
DS010801-30
DS010801-31
DS010801-32
www.national.com
6

6 Page









LM2990J-12-QML pdf, datenblatt
Notes
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
www.national.com
National Semiconductor
Europe
Fax: +49 (0) 1 80-530 85 86
Deutsch Tel: +49 (0) 1 80-530 85 85
English Tel: +49 (0) 1 80-532 78 32
Français Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
National Semiconductor
Japan Ltd.
Tel: 81-3-5639-7560
Fax: 81-3-5639-7507
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.

12 Page





SeitenGesamt 12 Seiten
PDF Download[ LM2990J-12-QML Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
LM2990J-12-QMLNegative Low Dropout RegulatorNational Semiconductor
National Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche