|
|
Teilenummer | NX1-15T-KT9K |
|
Beschreibung | Simple Assembly Type PC Card Frame Kits | |
Hersteller | Hirose Electric | |
Logo | ||
Gesamt 6 Seiten Simple Assembly Type PC Card Frame Kits
NX1 Series
Back connector
68-contact socket
sFeatures
1. Great reduction of the number of frame kit
assembly steps
Use of this simple assembly method has greatly reduced the
number of assembly steps. Processes such heat fusion and
cooling of the covers are no longer required. Assembly of the
frame kit is possible using simple jig tools. (See the Simple
Assembly Method insert to the right.).
2. Excellent Shielding Qualities
The covered construction using a metal panel out to the sides of
the card provide excellent shielding qualities. (See Figure 4.)
3. Board Offset
Available in types with board offsets of 0.3mm and 0.9mm.
4. Back connectors
Back Connectors available with 15,25, and 32 contacts.
5. Can Be Used With CardBus Types
6. Stable Conduction Maintained Between Panels
The spring quality of the metal ensures stable conduction to be
maintained between the panels at the panel lock portion.
7. Conduction Maintained Between Panel and Board
The cunduction between panel and board is maintained by
contact between the panel and a one-body ground spring.
sApplications
A wide variety of PC cards including LAN, FAX modem, and
SCSI.
Frame+Metal panel
Figure 1
Simple Assembly Method
Figure 2
Figure 3
Metal panel covers all the
way to the card sides
B2
Figure 4
(For details, see the frame Kit assembly procedure on page 6)
BFrame Kit Assembly Process
Assembly Process Figure 1
Mount the connectors(68-contact connectors,
back connectors) and other parts to the
printed circuit board (PCB).
NOTE :The procedure for the IC9 Series (suited to the
68-contact connectors and card bus) is to mount
the connector body, then insert the ground plate
and fasten the lead portion by hand.
PCB
Assembly Process Figure 2
Insert the PCB mounting part to panel B
(frame press fitting item).
68-Contact connector
Back connector
Panel B
Assembly Process Figure 3
Use the assembly jig (described below) to
insert panel A. (Press fit + lock)
Panel A
Assembly Process Figure 4
Assembled item
Assembly Jig
Assembly Process Figure 5
Affix the label to the indented portion of the panel.
NOTE :Hirose Electric Co. Ltd. will not provide label services.
(Please refer to the Recommended Label Dimensions
Diagram of Page 2.)
(The photograph shows the hand press model.)
Classification Part Number
CL No.
Without hand press NX1-/CVCK-MP 902-3530-7
With hand press NX1-/CVCK-MP(01) 902-3530-7(01)
B7
6 Page | ||
Seiten | Gesamt 6 Seiten | |
PDF Download | [ NX1-15T-KT9K Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
NX1-15T-KT9K | Simple Assembly Type PC Card Frame Kits | Hirose Electric |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |