Datenblatt-pdf.com


7LVC573APWDH Schematic ( PDF Datasheet ) - NXP Semiconductors

Teilenummer 7LVC573APWDH
Beschreibung Octal D-type transparent latch with 5-volt tolerant inputs/outputs 3-State
Hersteller NXP Semiconductors
Logo NXP Semiconductors Logo 




Gesamt 12 Seiten
7LVC573APWDH Datasheet, Funktion
INTEGRATED CIRCUITS
74LVC573A
Octal D-type transparent latch with 5-volt
tolerant inputs/outputs (3-State)
Product specification
1998 Jul 29
Philips
Semiconductors






7LVC573APWDH Datasheet, Funktion
Philips Semiconductors
Octal D-type transparent latch with 5-volt
tolerant inputs/outputs (3-State)
Product specification
74LVC573A
DC ELECTRICAL CHARACTERISTICS
Over recommended operating conditions voltages are referenced to GND (ground = 0V)
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
Temp = -40°C to +85°C
MIN TYP1 MAX
VIH HIGH level Input voltage
VIL LOW level Input voltage
VOH HIGH level output voltage
VOL LOW level output voltage
II Input leakage current2
VCC = 1.2V
VCC = 2.7 to 3.6V
VCC = 1.2V
VCC = 2.7 to 3.6V
VCC = 2.7V; VI = VIH or VIL; IO = –12mA
VCC = 3.0V; VI = VIH or VIL; IO = –100µA
VCC = 3.0V; VI = VIH or VIL; IO = –18mA
VCC = 3.0V; VI = VIH or VIL; IO = –24mA
VCC = 2.7V; VI = VIH or VIL; IO = 12mA
VCC = 3.0V; VI = VIH or VIL; IO = 100µA
VCC = 3.0V; VI = VIH or VIL; IO = 24mA
VCC = 3.6V; VI = 5.5V or GND
VCC
2.0
VCC*0.5
VCC*0.2
VCC*0.6
VCC*0.8
VCC
GND
"0.1
GND
0.8
0.40
0.20
0.55
"5
IOZ 3-State output OFF-state current
VCC = 3.6V; VI = VIH or VIL; VO = 5.5V or GND
0.1 "10
Ioff Power off leakage supply
VCC = 0.0V; VI or VO = 5.5V
0.1 "10
ICC Quiescent supply current
VCC = 3.6V; VI = VCC or GND; IO = 0
ICC
Additional quiescent supply current
per input pin
VCC = 2.7V to 3.6V; VI = VCC –0.6V; IO = 0
NOTES:
1. All typical values are at VCC = 3.3V and Tamb = 25°C.
2. The specified overdrive current at the data input forces the data input to the opposite logic input state.
0.1 10
5 500
UNIT
V
V
V
V
µA
µA
µA
µA
µA
AC CHARACTERISTICS
GND = 0V; tr = tf v 2.5ns; CL = 50pF; RL = 500; Tamb = –40°C to +85°C.
SYMBOL
PARAMETER
WAVEFORM
VCC = 3.3V ±0.3V
MIN TYP1 MAX
tPHL
tPLH
tPHL
tPLH
tPZH
tPZL
tPHZ
tPLZ
Propagation delay
Dn to Qn
Propagation delay
LE to Qn
3-State output enable time
OE to Qn
3-State output disable time
OE to Qn
1, 5 1.5 4.3 6.2
2, 5 1.5 4.6 6.5
2, 5 1.5 3.8 7.5
3, 5 1.5 3.5 6.0
tW LE pulse width HIGH
2 3.2 1.6
tSU
Setup time
Dn to LE
4 1.7 0.3
th
Hold time
Dn to LE
4 1.4 0.2
NOTE:
1. Unless otherwise stated, all typical values are at VCC = 3.3V and Tamb = 25°C.
LIMITS
VCC = 2.7V
MIN MAX
1.5 7.2
1.5 7.5
1.5 8.5
1.5 6.5
3.2 –
1.7 –
1.5 –
VCC = 1.2V
TYP
19
21
17
15
UNIT
ns
ns
ns
ns
ns
ns
ns
1998 Jul 29
6

6 Page









7LVC573APWDH pdf, datenblatt
Philips Semiconductors
Octal D-type transparent latch with 5-volt
tolerant inputs/outputs (3-State)
Product specification
74LVC573A
Data sheet status
Data sheet
status
Product
status
Definition [1]
Objective
specification
Development
This data sheet contains the design target or goal specifications for product development.
Specification may change in any manner without notice.
Preliminary
specification
Qualification
This data sheet contains preliminary data, and supplementary data will be published at a later date.
Philips Semiconductors reserves the right to make chages at any time without notice in order to
improve design and supply the best possible product.
Product
specification
Production
This data sheet contains final specifications. Philips Semiconductors reserves the right to make
changes at any time without notice in order to improve design and supply the best possible product.
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Sunnyvale, California 94088–3409
Telephone 800-234-7381
© Copyright Philips Electronics North America Corporation 1998
All rights reserved. Printed in U.S.A.
print code
Document order number:
Date of release: 08-98
9397-750-04513
Philips
Semiconductors
yyyy mmm dd
12

12 Page





SeitenGesamt 12 Seiten
PDF Download[ 7LVC573APWDH Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
7LVC573APWDHOctal D-type transparent latch with 5-volt tolerant inputs/outputs 3-StateNXP Semiconductors
NXP Semiconductors

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche