|
|
|
1.5KE100 Schematic ( PDF Datasheet ) - Bytes
| Teilenummer | 1.5KE100 |
|
| Beschreibung | 1500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS | |
| Hersteller | Bytes | |
| Logo |  |
|
Gesamt 4 Seiten 
1.5KE SERIES
1500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS
FEATURES
* 1500 Watts Surge Capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time: Typically less than
1.0ps from 0 volt to BV min.
* Typical IR less than 1µA above 10V
* High temperature soldering guaranteed:
260 C / 10 seconds / .375"(9.5mm) lead
length, 5lbs.(2.3kg) tension
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: Axial leads, solderable per MIL-STD-202,
method 208 guranteed
* Polarity: Color band denotes cathode end
* Mounting position: Any
* Weight: 1.20 grams
VOLTAGE RANGE
6.8 to 440 Volts
1500 Watts Peak Power
5.0 Watts Steady State
DO-201
.210(5.3)
.188(4.8)
DIA.
1.0(25.4)
MIN.
.375(9.5)
.285(7.2)
.042(1.1)
.037(0.9)
DIA.
1.0(25.4)
MIN.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATINGS
Peak Power Dissipation at TA=25 C, TP=1ms(NOTE 1)
Steady State Power Dissipation at TL=75 C
Lead Length .375"(9.5mm) (NOTE 2)
Peak Forward Surge Current at 8.3ms Single Half Sine-Wave
superimposed on rated load (JEDEC method) (NOTE 3)
Operating and Storage Temperature Range
SYMBOL
PPK
PD
IFSM
TJ, TSTG
NOTES:
1. Non-repetitive current pulse per Fig. 3 and derated above TA=25 C per Fig. 2.
2. Mounted on Copper Pad area of 0.8" X 0.8" (20mm X 20mm) per Fig.5.
3. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum.
VALUE
Minimum 1500
5.0
200
-55 to +175
DEVICES FOR BIPOLAR APPLICATIONS
1. For Bidirectional use C or CA Suffix for types 1.5KE6.8 thru 1.5KE440.
2. Electrical characteristics apply in both directions.
UNITS
Watts
Watts
Amps
C
138
| ||
| Seiten | Gesamt 4 Seiten | |
| PDF Download | [ 1.5KE100 Schematic.PDF ] | |
Link teilen
Besondere Datenblatt
| Teilenummer | Beschreibung | Hersteller |
| 1.5KE10 | HYB 39S16400CT-8 |  Won-Top Electronics |
| 1.5KE10 | TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR |  General Semiconductor |
| 1.5KE10 | 1500 Watt Transient Voltage Suppressors 6.8 to 400 Volts |  Micro Commercial Components |
| 1.5KE10 | 1500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS | Bytes |
| 1.5KE10 | TVS Diode (Transient Voltage Suppressor) |  EIC discrete Semiconductors |
| Teilenummer | Beschreibung | Hersteller |
| CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
 Fairchild Semiconductor |
| KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
 KEC |
| www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |