|
|
PDF MF799 Data sheet ( Hoja de datos )
| Número de pieza | MF799 | |
| Descripción | Datacom / Video Link / Intra-Office Telecom / WDM Duplex Device | |
| Fabricantes | Mitel Networks | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MF799 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
MF799 Datacom, Video Link, Intra-Office Telecom, WDM Duplex Device
MF799 ST
ST Assembly
Ordering Information
PART #
MF799
RECEPTACLE
ST
-40°C to +85°C
Applications
• Ethernet 10 or 100Mbps
• Token Ring
• Fibre Channel 266Mbps
• FDDI
• ATM-SDH/SONET 155Mbps
• Intra-Office Telecom
• WDM Applications
Features
• Full Duplex Communication
Over One Fiber
• Dual Wavelengths
820/1300nm
• Very Small Size
• Very Low Internal Crosstalk
• Packaged in Industry-
Standard ST® Receptacle
• Designed for 62.5/125µm
Fiber
Description
Used in combination with the
MF699, the MF-799 Duplex
Device is designed for WDM
(Wavelength Division Multiplex),
Datacom, Video Links, or Intra-
Office Telecom Applications. It
emits optical power at 820nm
and detects incoming optical
power at 1320nm, allowing full
Duplex Communication over
one single fiber.
The MF799 uses dichroic
(wavelength-selective)
beamsplitters for maximum
power budget and minimum
crosstalk. Minimum internal
crosstalk is achieved by the
use of wavelength-selective
Detectors. The long wavelength
path meets requirements for
FDDI (ANSI X3T9.5 and ATM
155Mbps.
The MF799 is designed for
multi-mode fiber and optimized
for 62.5/125µm fiber.
ANODE
CATHODE
BOTTOM VIEW
MF799 Functional Diagram
BOTTOM VIEW
ANODE
CATHODE
BOTTOM VIEW
ANODE
PIN
1320nm
MF799
LED
820nm
FIBER
DICHROIC
BEAMSPLITTER
28
PIN
820nm
MF699
LED
1320nm
ANODE
CATHODE
BOTTOM VIEW
13329.11 1997-04-01
1 page  
http://www.mitelsemi.com
North America
Tel: +1 (770) 486 0194
Fax: +1 (770) 631 8213
World Headquarters - Canada
Tel: +1 (613) 592 2122
Fax: +1 (613) 592 6909
Asia/Pacific
Tel: +65 333 6193
Fax: +65 333 6192
Europe, Middle East,
and Africa (EMEA)
Tel: +44 (0) 1793 518528
Fax: +44 (0) 1793 518581
Information relating to products and services furnished herein by Mitel Corporation or its subsidiaries (collectively “Mitel”) is believed to be reliable. However, Mitel assumes no
liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of
patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or
service conveys any license, either express or implied, under patents or other intellectual property rights owned by Mitel or licensed from third parties by Mitel, whatsoever.
Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Mitel, or non-Mitel furnished goods or services may infringe patents or
other intellectual property rights owned by Mitel.
This publication is issued to provide information only and (unless agreed by Mitel in writing) may not be used, applied or reproduced for any purpose nor form part of any order or
contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this
publication are subject to change by Mitel without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or
service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific
piece of equipment. It is the user’s responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or
data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in
any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Mitel’s
conditions of sale which are available on request.
M Mitel (design) and ST-BUS are registered trademarks of MITEL Corporation
Mitel Semiconductor is an ISO 9001 Registered Company
Copyright 1999 MITEL Corporation
All Rights Reserved
Printed in CANADA
TECHNICAL DOCUMENTATION - NOT FOR RESALE
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet MF799.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MF799 | Datacom / Video Link / Intra-Office Telecom / WDM Duplex Device | Mitel Networks |
| MF799ST | Datacom / Video Link / Intra-Office Telecom / WDM Duplex Device | Mitel Networks |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |