|
|
PDF MD54-0003 Data sheet ( Hoja de datos )
| Número de pieza | MD54-0003 | |
| Descripción | MMIC Medium Level Mixer 1700 - 2000 MHz | |
| Fabricantes | Tyco | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MD54-0003 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
MMIC Medium Level Mixer
1700 - 2000 MHz
MD54-0003
Features
q Low Conversion Loss
q +21 dBm Input Power @ 1 dB Compression
q Typical Two-Tone IM Ratio of ≥50 dBc
q LO Drive Level: +11 to +23 dBm
q DC - 200 MHz IF Bandwidth
q Low Cost Plastic SOIC Package
Description
M/A-COM’s MD54-0003 is a passive mixer that achieves
the performance of a double balanced diode mixer in a
low cost surface mount plastic SOIC 8-lead package. The
MD54-0003 is ideally suited for use where high level RF
signals and very wide dynamic range are required.
Typical applications include frequency up/down
conversion, modulation, demodulation in systems such
as base station receivers and transmitters for DCS1800,
PCS and PHS applications.
The MD54-0003 uses FETs as mixing elements to achieve
very wide dynamic range in a low cost plastic package.
The mixer operates with LO drive levels of +11 dBm to
+23 dBm. No DC bias is required.
M/A-COM’s MD54-0003 is fabricated using a mature
1-micron GaAs process. The process features full IC
passivation for increased performance and reliability.
V2.00
SO-8
PIN 8
Orientation
mark
.1497-.1574
(3.80-4.00)
-B-
.2284-.2440
(5.80-6.20)
.010(0.25) M B M
PIN 1
.1890-.1968
(4.80-5.00)
-A-
.0532-.0688
(1.35-1.75)
0°-8°
-C-
.0099-0.0196
x 45° Chamfer
(0.25-0.50)
.004 (0.10)
.050(1.27) BSC.
.0040-.0098
(0.10-0.25)
.013-.020 TYP.
(0.33-0.51)
.016-.050
(0.40-1.27)
.0075-0.0098
(0.19-0.25)
.010(0.25) M C A M B S
8- Lead SOP outline dimensions
Narrow body .150
(All dimensions per JEDEC No. MS-012-AA, Issue C)
Dimensions in ( ) are in mm.
Unless Otherwise Noted: .xxx = ± 0.010 (.xx = ± 0.25)
.xx = ± 0.02 (.x = ±0.5)
Ordering Information
Part Number
MD54-0003
MD54-0003TR
MD54-0003RTR
MD54-0003SMB
Description
SOIC 8-Lead Plastic Package
Forward Tape & Reel*
Reverse Tape & Reel*
Designer’s Kit
* Standard reel size is 7 inches. If other reel size is required, consult
factory for part number assignment.
Electrical Specifications
Test Conditions: RF = 1850 MHz (-10 dBm), LO = 1710 MHz (13 dBm), IF = 140 MHz, TA = +25°C
Parameter
Conversion Loss
Isolation
VSWR
Input 1 dB Compression
Two -Tone IM Ratio1
Test Conditions
LO to RF
LO to IF
RF to IF
LO Port
RF Port
IF Port
RF Freq. = 1800 MHz, LO = +13 dBm
Two tones at -10 dBm each,
Tone spacing = 100 kHz, IF = 140 MHz
Units
dB
dB
dB
dB
dBm
dBc
Min.
20
50
Typ.
8.5
27
12
10
2.5:1
2.0:1
2.0:1
+21
65
1. IMR vs RF drive level can be calculated by the formula: IMR = 50 - (1.5 x PIN)
Max.
9.5
Specifications Subject to Change Without Notice.
M/A-COM, Inc.
North America: Tel. (800) 366-2266
Fax (800) 618-8883
s Asia/Pacific: Tel. +81 (03) 3226-1671
Fax +81 (03) 3226-1451
1
s Europe: Tel. +44 (1344) 869 595
Fax +44 (1344) 300 020
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet MD54-0003.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MD54-0003 | MMIC Medium Level Mixer 1700 - 2000 MHz | Tyco |
| MD54-0003RTR | MMIC Medium Level Mixer 1700 - 2000 MHz | Tyco |
| MD54-0003SMB | MMIC Medium Level Mixer 1700 - 2000 MHz | Tyco |
| MD54-0003TR | MMIC Medium Level Mixer 1700 - 2000 MHz | Tyco |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |