DataSheet.es    


PDF PI3B16210A Data sheet ( Hoja de datos )

Número de pieza PI3B16210A
Descripción 3.3V/ 20-Bit/ 2-Port NanoSwitch
Fabricantes Pericom Semiconductor Corporation 
Logotipo Pericom Semiconductor Corporation Logotipo



Hay una vista previa y un enlace de descarga de PI3B16210A (archivo pdf) en la parte inferior de esta página.


Total 3 Páginas

No Preview Available ! PI3B16210A Hoja de datos, Descripción, Manual

PI3B16210
PI3B162210 (25)1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122112233445566778899001122
3.3V, Hot Insertion 20-Bit, 2-Port BusSwitch
Product Features
• Near-zero propagation delay
• 5or 25Ω switches connect inputs to outputs
• Fair Switching Speed - 4.5ns max.
• 32X384 function with flow through pinout make board
layout easier
• Permits Hot Insertion.
• Vcc Operating Range: 3.0V to 3.6V
• Industrial operating temperature: –40°C to +85°C
• Packages available:
– 48-pin 150-mil wide plastic QSOP (B)
– 48-pin 240-mil wide plastic TSSOP (A)
– 48-pin 300-mil wide plastic SSOP (V)
Product Description
Pericom Semiconductor’s PI3B series of BusSwitch circuits are
produced in the Company’s advanced 0.35 micron CMOS
technology, achieving industry leading speed.
The PI3B16210 is configured as 3.3 volt 20-bit, 2-port bus
switches designed with a low ON resistance (5) allowing inputs
to be connected directly to outputs. The bus switch creates no
additional propagational delay or additional ground bounce noise.
The switches are turned ON by the Bus Enable (xOE) input signal.
The PI3B162210 device has a built-in 25-ohm series resistor to
reduce noise resulting from reflections, thus eliminating the need
for an external terminating resistor.
Logic Block Diagram
Product Pin Configuration
1A1 1B1
1A10
1OE
2A1
1B10
2B1
48-Pin
2A10
2B10
2OE
Truth Table(1)
Inputs
Inputs/Outputs
1OE 2OE 1A,1B 2A,2B
L L 1A = 1B 2A = 2B
L H 1A = 1B Z
HL
Z 2A = 2B
HH
Z
Note:
1. H = High Voltage Level
L = Low Voltage Level
Hi-Z = High Impedance
Z
Product Pin Description
Pin Name
1OE, 2OE
1A1-1A10, 2A1-2A10
1B1 - 1B10, 2B1 - 2B10
Description
Bus Enable Inputs (Active LOW)
Bus A
Bus B
1 PS8193B 11/09/98

1 page





PáginasTotal 3 Páginas
PDF Descargar[ Datasheet PI3B16210A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
PI3B162103.3V/ 20-Bit/ 2-Port NanoSwitchPericom Semiconductor Corporation
Pericom Semiconductor Corporation
PI3B162103.3V/ Hot Insertion 20-Bit/ 2-Port BusSwitchPericom Semiconductor Corporation
Pericom Semiconductor Corporation
PI3B16210A3.3V/ 20-Bit/ 2-Port NanoSwitchPericom Semiconductor Corporation
Pericom Semiconductor Corporation
PI3B16210AE3.3V/ 20-Bit/ 2-Port NanoSwitchPericom Semiconductor Corporation
Pericom Semiconductor Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar