Datenblatt-pdf.com


MC14015BCP Schematic ( PDF Datasheet ) - ON Semiconductor

Teilenummer MC14015BCP
Beschreibung Dual 4-Bit Static Shift Register
Hersteller ON Semiconductor
Logo ON Semiconductor Logo 




Gesamt 12 Seiten
MC14015BCP Datasheet, Funktion
MC14015B
Dual 4-Bit Static
Shift Register
The MC14015B dual 4–bit static shift register is constructed with
MOS P–channel and N–channel enhancement mode devices in a
single monolithic structure. It consists of two identical, independent
4–state serial–input/parallel–output registers. Each register has
independent Clock and Reset inputs with a single serial Data input.
The register states are type D master–slave flip–flops. Data is shifted
from one stage to the next during the positive–going clock transition.
Each register can be cleared when a high level is applied on the Reset
line. These complementary MOS shift registers find primary use in
buffer storage and serial–to–parallel conversion where low power
dissipation and/or noise immunity is desired.
Diode Protection on All Inputs
Supply Voltage Range = 3.0 Vdc to 18 Vdc
Logic Edge–Clocked Flip–Flop Design —
Logic state is retained indefinitely with clock level either high or low;
information is transferred to the output only on the positive going
edge of the clock pulse.
Capable of Driving Two Low–power TTL Loads or One Low–power
Schottky TTL Load Over the Rated Temperature Range.
MAXIMUM RATINGS (Voltages Referenced to VSS) (Note 2.)
Symbol
Parameter
Value
VDD
Vin, Vout
DC Supply Voltage Range
Input or Output Voltage Range
(DC or Transient)
– 0.5 to +18.0
– 0.5 to VDD + 0.5
Unit
V
V
Iin, Iout
Input or Output Current
(DC or Transient) per Pin
± 10 mA
PD Power Dissipation,
per Package (Note 3.)
500 mW
TA Ambient Temperature Range
Tstg Storage Temperature Range
TL Lead Temperature
(8–Second Soldering)
– 55 to +125
– 65 to +150
260
°C
°C
°C
2. Maximum Ratings are those values beyond which damage to the device
may occur.
3. Temperature Derating:
Plastic “P and D/DW” Packages: – 7.0 mW/_C From 65_C To 125_C
This device contains protection circuitry to guard against damage due to high
static voltages or electric fields. However, precautions must be taken to avoid
applications of any voltage higher than maximum rated voltages to this
v vhigh–impedance circuit. For proper operation, Vin and Vout should be constrained
to the range VSS (Vin or Vout) VDD.
Unused inputs must always be tied to an appropriate logic voltage level (e.g.,
either VSS or VDD). Unused outputs must be left open.
http://onsemi.com
PDIP–16
P SUFFIX
CASE 648
MARKING
DIAGRAMS
16
MC14015BCP
AWLYYWW
1
SOIC–16
D SUFFIX
CASE 751B
16
14015B
AWLYWW
1
TSSOP–16
DT SUFFIX
CASE 948F
16
14
015B
ALYW
SOEIAJ–16
F SUFFIX
CASE 966
1
16
MC14015B
AWLYWW
1
A = Assembly Location
WL or L = Wafer Lot
YY or Y = Year
WW or W = Work Week
ORDERING INFORMATION
Device
Package
Shipping
MC14015BCP
PDIP–16
2000/Box
MC14015BD
SOIC–16
48/Rail
MC14015BDR2 SOIC–16 2500/Tape & Reel
MC14015BDT
TSSOP–16 2000/Tape & Reel
MC14015BF
SOEIAJ–16 See Note 1.
MC14015BFEL SOEIAJ–16 See Note 1.
1. For ordering information on the EIAJ version of
the SOIC packages, please contact your local
ON Semiconductor representative.
© Semiconductor Components Industries, LLC, 2000
March, 2000 – Rev. 3
1
Publication Order Number:
MC14015B/D






MC14015BCP Datasheet, Funktion
MC14015B
CIRCUIT SCHEMATICS
http://onsemi.com
6

6 Page









MC14015BCP pdf, datenblatt
MC14015B
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
NORTH AMERICA Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
EUROPE: LDC for ON Semiconductor – European Support
German Phone: (+1) 303–308–7140 (M–F 1:00pm to 5:00pm Munich Time)
Email: ONlit–[email protected]
French Phone: (+1) 303–308–7141 (M–F 1:00pm to 5:00pm Toulouse Time)
Email: ONlit–[email protected]
English Phone: (+1) 303–308–7142 (M–F 12:00pm to 5:00pm UK Time)
EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781
*Available from Germany, France, Italy, England, Ireland
CENTRAL/SOUTH AMERICA:
Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)
Email: ONlit–[email protected]
ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support
Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)
Toll Free from Hong Kong & Singapore:
001–800–4422–3781
Email: ONlit–[email protected]
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–8549
Phone: 81–3–5740–2745
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
http://onsemi.com
12
MC14015B/D

12 Page





SeitenGesamt 12 Seiten
PDF Download[ MC14015BCP Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
MC14015BCPDual 4-Bit Static Shift RegisterON Semiconductor
ON Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche