|
|
PDF MC-211RC Data sheet ( Hoja de datos )
| Número de pieza | MC-211RC | |
| Descripción | Coil Components (Relay Headers) | |
| Fabricantes | Hirose Electric | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MC-211RC (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
Coil Components (Relay Headers)
MC-R and MC-RC Series
75 ohms Type (MC-RC Series)
MC-201RC
MC-202RC
MC-301RC
MC-212RC
MC-211RC
MC-213RC
MC-216RC
MC-214RC
sFeatures
1.Excellent High Frequency Characteristics
The use of coils made with a special winding
method based on a lumped-constant design
provide a high degree of matching, low loss, and
high isolation.
2.Highly Reliable Design
The metal case is designed with a hermetically sealed
construction which contains inert gas. This permits
quality to be maintained over a long period.
50 ohms Type (MC-R Series)
MC-201R
MC-212R
MC-213R
3.Easy Soldering
The pre-soldering leads give easy soldering operations.
4.Prevention of Flux Creepage
Use of the supplied Teflon sheet permits the prevention
of solder flux creepage.
sProduct Specifications
Ratings
Frequency range (Note)
Characteristic impedance (Note)
Maximum Input Power
30 to 200 MHz
50 ohms, 75 ohms
0.5 W
Operating temperature range
Operating relative humidity
Note: The frequency range and the characteristic impedance will differ depending on the products.
-10ç to +65ç
95% Max.
Item
Standard
Conditions
1.Vibration
Frequency of 10 to 2000 Hz, overall amplitude of 1.5 mm,
acceleration of 98 m/s2 for 4 hours in each of 3 directions
2.Shock
No damage, cracks, or parts dislocation
Acceleration of 294 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis
3.Temperature cycle
Temperature: -35ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes)
5 cycles
qThe test method conforms to MIL-STD-202.
sMaterials
sExternal Dimensions
Part
Board
Contacts
Hermetic seal
Material
Iron
Iron-nickel alloy
Glass
Finish
Nickel plating
Solder dip
----------
Teflon sheet (t=0.2)
sOrdering Information
MC - 2 0 1 R C
1 2345 6
1 Series Name: MC
4 Suffix
2 Number of Divisions
5 Form of Case
Indicated by number of divisions of output. R: Relay header
3 Phase Difference
6 Characteristic Impedance
Indicated by phase difference of output. C : 75ø
0 : 0°
Blank : 50ø
1 : 90°
Green hermetic seal
sFunction Diagram
2, 3, 4, 5, and 6 are ground
3, 4, 7, and 8 are ground
3, 4, 7, and 8 are ground
3, 4, and 7 are ground
49
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet MC-211RC.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MC-211RC | Coil Components (Relay Headers) | Hirose Electric |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |