Datenblatt-pdf.com


LA5632 Schematic ( PDF Datasheet ) - Sanyo

Teilenummer LA5632
Beschreibung Multiple Power Supply System Regulator
Hersteller Sanyo
Logo Sanyo Logo 




Gesamt 6 Seiten
LA5632 Datasheet, Funktion
Ordering number : ENN5998
Monolithic linear IC
LA5632
Multiple Power Supply System Regulator
Overview
The LA5632 is a multiple power supply IC that provides
two 3.3-V regulator circuits as well as two 5-V regulator
circuits. This device is optimal for MD players and similar
applications.
Functions and Features
• Two built-in 3.3-V regulator circuits (IO = 60 mA,
150 mA)
• Two built-in 5-V regulator circuits (IO = 1000 mA,
100 mA)
• Power on/off detection circuit included
• The reset circuit operates from the B.BAK voltage.
• The reset circuit current drain is extremely low (3.5 µA
(typical) in backup mode)
Pd max — Ta
14
100 × 100 × 1.5 mm3
12
Package Dimensions
unit: mm
3149A-SIP12H
[LC5632]
27.0
20.0
1
2.5 2.0 0.5
1.0
12
4.0
0.4
2.0
SANYO: SIP12H
10
8
50 × 50 × 1.5 mm3
6.5
6
6.7
4
Independent IC
2.3
2
0
–20 0
20 40
60
Ambient temperature, Ta — °C
3.6
1.3
80
100
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
22500RM (OT) No. 5998-1/6






LA5632 Datasheet, Funktion
LA5632
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products (including technical data, services) described or contained
herein are controlled under any of applicable local export control laws and regulations, such products must
not be exported without obtaining the export license from the authorities concerned in accordance with the
above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of February, 2000. Specifications and information herein are subject
to change without notice.
PS No. 5998-6/6

6 Page







SeitenGesamt 6 Seiten
PDF Download[ LA5632 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
LA5632Multiple Power Supply System RegulatorSanyo
Sanyo
LA5636MDC/DC Converter Secondary Side Control ICSanyo Semicon Device
Sanyo Semicon Device

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche