|
|
Teilenummer | TDA1016 |
|
Beschreibung | Recording/playback and 2 W audio power amplifier | |
Hersteller | NXP Semiconductors | |
Logo | ||
Gesamt 9 Seiten INTEGRATED CIRCUITS
DATA SHEET
TDA1016
Recording/playback and
2 W audio power amplifier
Product specification
File under Integrated Circuits, IC01
August 1987
Philips Semiconductors
Recording/playback and
2 W audio power amplifier
Product specification
TDA1016
SYMBOL
PARAMETER
MIN.
TYP. MAX.
UNIT
Automatic Level Control (A.L.C.) (see Fig.3); see note 4
∆Gv Gain variation for ∆Vi = 45 dB
tl Limiting time; see note 3
ts Level setting time; see note 3
tr Recovery time; see notes 3 and 5
Voltage stabilizer
V11-15
l11
RR
Output voltage
Load current
Ripple rejection at f = 100 Hz
−
23
dB
−
− 50
ms
−
− 50
ms
− 100 −
s
− 2,6 −
V
− − 1,5 mA
40 − − dB
Notes
1. Measured with an ideal coupling capacitor connected to the speaker load.
2. lP (effective value) must not exceed 1 mA.
3. At ∆Vi = dB with respect to Vi = 1,2 mV.
4. The A.L.C. tracking in stereo has a typical spread of 1 dB if pins 6 of both ICs are connected to the same RC network.
5. Without a shunt resistor across A.L.C. With 1 MΩ or 2,2 MΩ across A.L.C. recovery time becomes 22 or 50 seconds.
August 1987
6
6 Page | ||
Seiten | Gesamt 9 Seiten | |
PDF Download | [ TDA1016 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
TDA1010 | 6 W audio power amplifier in car applications 10 W audio power amplifier in mains-fed applications | NXP Semiconductors |
TDA1010A | Audio Power Output | ETC |
TDA1010A | 6 W audio power amplifier in car applications 10 W audio power amplifier in mains-fed applications | NXP Semiconductors |
TDA1011 | 2 to 6 W audio power amplifier | NXP Semiconductors |
TDA1011A | 2 to 6w Audio Power Amplifier With Preamplifier | NXP Semiconductors |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |