|
|
PDF SMP6LC12 Data sheet ( Hoja de datos )
| Número de pieza | SMP6LC12 | |
| Descripción | TVSarray Series | |
| Fabricantes | Microsemi Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SMP6LC12 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
8700 E. Thomas Road
Scottsdale, AZ 85252
Tel: (480) 941-6300
Fax: (480) 947-1503
DESCRIPTION (600 watt)
This 16 pin 2 line Bidirectional LOW CAPACITANCE array is designed for use
in applications where protection is required at the board level. Providing
protection from voltage transients caused by electrostatic discharge (ESD) as
defined in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4, and
effects of secondary lighting as stated by IEC 1000-4-5.
SMP6LC5.0
Thru
SMP6LC12
TVSarray™ Series
These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays have a
peak power of 600 watts for an 10x1000 µsec pulse and are designed to be
used for secondary surge protection on telephone lines. This device can be
used in either common or differential mode applications. For example in the
circuit diagram on the following page use: TIP to (A) and (C) to ground, RING
to (B) and (D) to ground for common mode, or TIP to (A) and RING to (C), or
TIP to (B) and RING to (D) for differential mode.
FEATURES
• 600 watts Peak Pulse Power 10x1000
• Protects up through 12 Volt Components
• Protects 4 Unidirectional lines or 2 Bidirectional
Lines
• Provides electrically isolated protection
• SO-16 Packaging
• UL 94V-0 Flammability Classification
MAXIMUM RATINGS
• Operating Temperatures: -550C to +1500C
• Storage Temperature: -550C to +1500C
• Peak Pulse Power: 600 Watts (10/1000 µsec, Figure 1 and 2)
• Pulse Repetition Rate: <.01%
MECHANICAL
• Molded SO-16 Surface Mount
• Weight: 0.128 grams (approximate)
• Body Marked with Logo, and device number
• Pin #1 defined by DOT on top of package
PACKAGING
• Tape & Reel EIA Standard 481-1-A
• 13 inch reel 2,500 pieces (OPTIONAL
• Carrier tubes 50 pcs per (STANDARD)
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless otherwise specified
PART
NUMBER
DEVICE
MARKING
STAND-OFF
VOLTAGE
VWM
VOLTS
BREAKDOWN
VOLTAGE
VBR
@10 mA
VOLTS
CLAMPING
VOLTAGE
VC
@ IPP
VOLTS
MAXIMUM
LEAKAGE
CURRENT
@VWM
ID
µA
PEAK
PULSE
CURRENT
@ 10/1000 µS
IPP
AMPS
CAPACITANCE
(f=1 MHz)
@0V
C
PER LINE PAIR
pF
MAX
MIN MAX TYP TYP TYP
SMP6LC05 SMP6LC5.0
5.0
6.0 9.6 300 10
30
SMP6LC6.5 SMP6LC6.5
6.5
7.22 12.4 300
10
30
SMP6LC12 SMP6LC12
12.0
13.3 19.9
2.0
10
30
NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off voltage VWM. Product
selected voltage should be equal to or greater than the continuous or peak operating voltage of the circuit to be
protected.
Application: The SMP6LCXX product is designed for transient voltage suppression protection of components at the
board level. It is an ideal product to be used for protection of HIGH SPEED I/O TRANSCEIVERS.
MSC1379.PDF ISO 9001 CERTIFIED
REV C 10/15/99
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet SMP6LC12.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SMP6LC12 | TVSarray Series | Microsemi Corporation |
| SMP6LC12-2P | LOW CAPACITANCE TVS ARRAY |  Protek Devices |
| SMP6LC15-2P | LOW CAPACITANCE TVS ARRAY | Protek Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |