|
|
PDF SMDA05C-5 Data sheet ( Hoja de datos )
| Número de pieza | SMDA05C-5 | |
| Descripción | TVSarray Series | |
| Fabricantes | Microsemi Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SMDA05C-5 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
8700 E. Thomas Road
Scottsdale, AZ 85251
Tel: (480) 941-6300
Fax: (480) 947-1503
SMDA03C-5
thru
SMDA24C-5
DESCRIPTION (300 watt)
This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is
packaged in a SO-8 configuration giving protection to 5
Bidirectional data or interface lines. It is designed for use in
applications where protection is required at the board level from
voltage transients caused by electrostatic discharge (ESD) as
defined in IEC 1000-4-2, electrical fast transients (EFT) per IEC
1000-4-4 and effects of secondary lighting.
TVSarray™ Series
These TVS arrays have a peak power rating of 300 watts for an 8/20
µsec pulse. This array is suitable for protection of sensitive circuitry consisting of TTL, CMOS DRAM’s,
SRAM’s, HCMOS, HSIC microprocessors, and I/O transceivers. The SMDAXXC-5 product provides board
level protection from static electricity and other induced voltage surges that can damage sensitive circuitry.
FEATURES
• Protects up to 5 Bidirectional lines
• Surge protection Per IEC 1000-4-2, 1000-4-4
• SO-8 Packaging
MECHANICAL
• Molded SO-8 Surface Mount
• Weight: 0.066 grams (approximate)
• Marking: Logo, device number, date code
• Pin #1 defined by DOT on top of package
MAXIMUM RATINGS
• Operating Temperatures: -550C to +1500C
• Storage Temperature: -550C to +1500C
• Peak Pulse Power: 300 Watts (8/20 µsec, Figure 1)
• Pulse Repetition Rate: <.01%
PACKAGING
• Tape & Reel EIA Standard 481-1-A
• 13 inch reel 2,500, pieces (OPTIONAL)
• Carrier tubes 95 pcs per (STANDARD)
ELECTRICAL CHARACTERISTICS PER LINE @ 250C Unless otherwise specified
PART
NUMBER
DEVICE
MARKING
STAND
OFF
VOLTAGE
VWM
VOLTS
MAX
BREAKDOWN
VOLTAGE
VBR
@1 mA
VOLTS
MIN
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
MAX
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
MAX
LEAKAGE
CURRENT
ID
@ VWM
µA
MAX
CAPACITANCE
(f=1 MHz)
@0V
C
pF
TYP
SMDA03C-5
SDL5
3.3
4
7
9 200 300
SMDA05C-5
SDB5
5.0
6.0
9.8
11 40
200
SMDA12C-5
SDD5
12.0
13.3
19.0
24
1
75
SMDA15C-5
SDF5
15.0
16.7
24.0
30
1
50
SMDA24C-5
SDH5
24.0
26.7
43.0
55
1
35
TEMPERATURE
COEFFICIENT
OF VBR
áVBR
mV/°C
MAX
-5
3
10
13
30
NOTE: TVS product is normally selected based on its stand off Voltage VWM. Product selected voltage
should be equal to or greater than the continuous peak operating voltage of the circuit to be protected.
Application: The SMDAXXC-5 product is designed for transient voltage suppression protection of ESD
sensitive components at the board level. It is an ideal product to be used for protection of I/O Transceivers.
MSC0331A.PDF
ISO 9001 CERTIFIED
REV N 7/06/2000
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet SMDA05C-5.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SMDA05C-4 | TVSarray Series | Microsemi Corporation |
| SMDA05C-4 | TVS Diode (Transient Voltage Suppressor) |  Micro Commercial Components |
| SMDA05C-4-2 | TVSarray Series | Microsemi Corporation |
| SMDA05C-4-2 | TVSarray Series | Micro Commercial Components |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |