|
|
Número de pieza | P6SMBJ10A | |
Descripción | SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 to 220 Volts 600 Watt Peak Power Pulse) | |
Fabricantes | Pan Jit International Inc. | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de P6SMBJ10A (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
No Preview Available ! Approve Sheet Part Number: P6SMBJ SERIES
3.DATA SHEET
P6SMBJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE - 5.0 to 220 Volts 600 Watt Peak Power Pulse
FEATURES
• For surface mounted applications in order to optimize board space.
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Excellent clamping capability
• Low inductance
• Fast response time: typically less than 1.0 ps from 0 volts to BV min
• Typical IR less than 1µA above 10V
• High temperature soldering : 250°C/10 seconds at terminals.
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
SMB / DO-214AA
Unit: inch ( mm )
.185 (4.70)
.160 (4.06)
.012 (.305)
.006 (.152)
MECHANICAL DATA
Case: JEDEC DO-214AA, Molded plastic over passivated junction
Terminals: Solder plated , solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes positive end ( cathode) except
Bidirectional.
Standard Packageing: 12mm tape per (EIA-481)
Weight: 0.003 ounces, 0.093 gram
.050 (1.27)
.030 (0.76)
.008(.203)
.002(.051)
.220 (5.59)
.200 (5.08)
MAXIMUM RATINGS AND CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
RATING
Peak Power Dissipation at TA=25°C, TP=1ms(Note 1,2 ,Fig.1 )
Peak Forward Surge Current,8.3ms single half sine-wave
superimposed on rated load (Note 2,3)
Peak Pulse Current Current on 10/1000µs waveform(Note 1,Fig.3 )
Operating and Storage Temperature Range
SYMBOL
PPPM
IFSM
I
PPM
TJ, TSTG
VALUE
Minimum 600
100.0
See Table 1
-55 to +150
UNITS
Watts
Amps
Amps
°C
NOTES:
1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25°Cper Fig. 2.
2.Mounted on 5.0mm2 ( .013mm thick) land areas.
3.Measured on 8.3ms , single half sine-wave or equivalent square wave , duty cycle= 4 pulses per minutes maximum.
PAGE . 3
1 page |
Páginas | Total 4 Páginas | |
PDF Descargar | [ Datasheet P6SMBJ10A.PDF ] |
Número de pieza | Descripción | Fabricantes |
P6SMBJ10 | SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 to 220 Volts 600 Watt Peak Power Pulse) | Pan Jit International Inc. |
P6SMBJ10 | SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0-170Volts | Surge Components |
P6SMBJ10 | TVS Diode, SMD (Transient Voltage Suppressor) | TRSYS |
P6SMBJ10 | Surface Mount unidirectional and bidirectional Transient Voltage Suppressor Diodes | Diotec Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |