|
|
PDF TM-1320A Data sheet ( Hoja de datos )
| Número de pieza | TM-1320A | |
| Descripción | monochrome progressive scan CCD cameras | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TM-1320A (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
AccuPiXEL™ Series
TM-1320A
TM-1320A-15 & TM-1320A-24
General Description
The TM-1320A series are miniature, high-resolution
monochrome progressive scan CCD cameras. The active image
resolution is 1300 x 1030 pixels out of 1392 x 1040 total pixels
using high sensitivity CCD and the available frame rate is 15 or
24 frames per second. The interline transfer CCD permits full
Product Summary
vertical and horizontal resolution of high-speed shuttered
images. The electronic shutter has speeds up to 1/16,000 sec.
and can be reset asynchronously by external pulse control.
The TM-1320A series has a patent-pending, PULNiX
• High-resolution 2/3" progressive scan
1300(H) x 1030(V) interline transfer CCD imager output
• Miniature 44x44x64 mm housing with high-rel
connector
exclusive, built-in look-up table (LUT). This full dynamic range
• Digital RS-644 (LVDS) output and analog output
control function can be set at externally selectable knee slopes to • 15 frames per second (TM-1320A-15), 24 frame model
optimize the CCD's full dynamic range in the normal output
(TM-1320A-24)
signal range. It also provides fast 10-bit to 8-bit pre-processing
• Maximum dynamic range control with PULNiX-
for effective image feature enhancement. The cameras have both
exclusive, patent-pending built-in look-up table
analog and digital (RS-644) output for interfacing with frame
(Gamma, knee, user parameters)
grabbers.
• Full frame integration, partial scan (1300x500 pixels,
All camera-control functions are externally controlled via a
1300 x 250) at 30, 55 or 48, 80 fps.
user-friendly RS-232C graphical interface provided by PULNiX.
• Full-frame shutter to 1/16,000 sec.
Applications for the TM-1320A series include machine vision,
medical imaging, intelligent transportation systems, high-
definition graphics, gauging, character recognition, documents
archiving, and surveillance.
The TM-1320A series is a direct replacement of TM-1320
PRELIMINARYseries.
Asynchronous Reset
The TM-1320A series' asynchronous reset is flexible and
accepts external horizontal drive (HD) for phase locking. When
the VINIT pulse is applied, it resets the camera's scanning and
• Asynchronous reset, no-delay shutter and read-out-
inhibit control for multiple camera applications
• RS-232 external control
• Camera Link version:TM-1320A-15CL,TM-1320A-24CL
• Color version (RGB BAyer CFA) is available
(TMC-1320A-15,TMC1320A-24)
Electronic Shutter
The TM-1320A series has a substrate drain-type shutter
mechanism which provides a superb picture at various speeds
without smearing. A built-in manual shutter speed control selects
purging of the CCD. There are two modes to control the
the electronic shutter rate of 1/60 (non-async mode only), 1/125,
asynchronous reset and shutter speed:
1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/8,000, or 1/16,000
1 External VINIT with pulse width. The duration between pulse second.
edges controls the shutter speed externally.
The CCD discharges when discharge pulse is applied via
2 Internal shutter speed control. The speed control varies from
1/125 to 1/16,000 sec. The video signal and FDV starts with
internal V reset timing related to shutter speed.
internal shutter control. With a negative pulse to VINIT, the
camera resets and purges the CCD charge momentarily. Then it
starts integrating for the period of preset shutter control time by
either an external pulse width or internal shutter control.
Progressive scanning permits a full 1030 lines of vertical
VINIT
ASYNC RESET
resolution, as compared to a conventional CCD camera which
captures only half the vertical lines per shutter.
VD
SG (TRANSFER GATE)
DISCHARGE PULSE
FDV
DIGITAL DATA
Shutter Mode
VIDEO
Stand-by Image
NO-shutter mode
SG
Shutter Video
Stand-by Image
VIDEO
Normal Video Interrupted Image 1st Frame
Invalid data
Normal Video
Normal Video
Integration
The CCD imager of the TM-1320A series can be exposed for
longer than the normal scan timing of 1/15 sec. This integration
feature provides extra sensitivity for dark-environment
applications. The progressive-scan imager permits a full frame of
resolution in non-interlace format. Integration is achieved by
applying INTEG signal to pin #11 of the 12-pin connector or pin
#6 of the 31-pin connector, or by feeding VINIT pulse width
control up to 1 sec of the pulse width.
AccuPiXEL™ is a registered trademark of PULNiX America, Inc.
www.pulnix.com
Innovation at work!
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet TM-1320A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TM-1320A | monochrome progressive scan CCD cameras | ETC |
| TM-1320A-15 | monochrome progressive scan CCD cameras | ETC |
| TM-1320A-24 | monochrome progressive scan CCD cameras | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |