Datenblatt-pdf.com


U.FL-LP-N-2 Schematic ( PDF Datasheet ) - Hirose Electric

Teilenummer U.FL-LP-N-2
Beschreibung Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Hersteller Hirose Electric
Logo Hirose Electric Logo 




Gesamt 8 Seiten
U.FL-LP-N-2 Datasheet, Funktion
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
U.FL Series
Meets up to 6 GHz Requirement
Mated Height Comparison
(With Hirose Product)
U.FL-LP(V)-040
U.FL-LP-040
U.FL-LP-066
E.FL-LP-040
E.FL-LP-066
U.FL Series
E.FL Series
sFeatures
1. Low Profile: 1.9mm or 2.4mm Nom. Mated Height
Height from the circuit board is 2.0mm or 2.5mm maximum
when a plug (right angle) is mated to a receptacle, which ranks
with world’s smallest class.
2.Extremely Small Occupied Mounting Area
In comparison with our SMT coaxial connectors E.FL series, the
receptacle provides a reduction of approximately 18% of
occupied mounting surface, which is only 7.7mm2.
3.Light Weight
One of the world’s lightest coaxial connectors.
Receptacle: 15.7mg
4.Applicable Up to 6 GHz Frequency
To meet the frequency requirements of a wide variety of
miniature equipment, these connectors offer high frequency
performance from DC to 6 GHz.
5.Board placement with automatic equipment
Supplied on tape-and-reel packaging.
6.Use of Ultra-fine Teflon Cable
From among the types of applicable cable, dia. 0.81mm(single
shielded) ultra-fine Teflon coaxial cable has been made a
standard specification in construction area.
Refer to the following pages for different cable types.
7.Simple Removal of Connector
The extraction jig permits simple removal of connectors.
8.User Friendly Mating Operation
Tactile lock feeling ensures engagement even with this small
size.
qSpace Factor of Mated Connector
U.FL-LP-040
U.FL-R-SMT
U.FL-LP-066
NEW
NEW
U.FL-R-SMT
U.FL-LP(V)-040
U.FL-R-SMT
U.FL-LP-062
U.FL-R-SMT
sApplications
Mobile phones, Wireless LAN, Mini-PCI, Bluetooth, PDA, GPS,
electronic measuring instruments, etc.
NEW
U.FL-LP-088
U.FL-R-SMT
2003.9
1






U.FL-LP-N-2 Datasheet, Funktion
sUsage Precautions
1. Plugs
(1) Connection/
disconnection of
connectors
1) To disconnect connectors, hook the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 onto the connector cover and
pull off vertically in the direction of the connector mating axis.
1) To remove the connector directly, hold the connector cover and pull off
Extraction Jig
vertically in the direction of the connector mating axis.
(Please exercise caution so as not to injure fingertips or nails.)
2) To mate the connectors, the mating axes of both connectors are aligned
U.FL Cable
Assembly
and the connectors are inserted as perpendicularly as possible.
Do not attempt to insert on an extreme angle.
U.FL-R-SMT
After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram
below.
(2) Permissible load on
the cable after
connector mating.
U.FL-LP-040
U.FL-R-SMT
2N max.
4N max.
2N max.
(3) Precautions
Do NOT forcefully twist or deform wires.
2. Receptacles
(1) Recommended
temperature profile
(Reference)
Heating peak
( ) 240 3 seconds
260
240
220
200
180
Preheating 183
160 (130 to 165 )
140
120 40 to 50
100 Within 2 minutes seconds
80
Time
(2) Recommended
manual soldering
(Reference)
1) The temperature profile indicates the board surface temperature at the point of contacts with the connector
terminals (for surface mounted receptacle).
2) The temperature profile will change depending on conditions which include such factors as the size of the board,
the solder used, and the solder thickness.
Manual soldering: 350˚C for 5 seconds
(3) Recommended screen
thickness
0.1 to 0.15 mm
6

6 Page







SeitenGesamt 8 Seiten
PDF Download[ U.FL-LP-N-2 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
U.FL-LP-N-2Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated HeightHirose Electric
Hirose Electric

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche