Datenblatt-pdf.com


6N135 Schematic ( PDF Datasheet ) - Fairchild Semiconductor

Teilenummer 6N135
Beschreibung HIGH SPEED TRANSISTOR OPTOCOUPLERS
Hersteller Fairchild Semiconductor
Logo Fairchild Semiconductor Logo 




Gesamt 12 Seiten
6N135 Datasheet, Funktion
HIGH SPEED
TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135
DUAL-CHANNEL: HCPL-2530
PACKAGE
6N136
HCPL-2531
HCPL-2503
SCHEMATIC
HCPL-4502
8
1
8
1
8
1
N/C 1
+2
V
F
_3
N/C 4
8
V
CC
7
V
B
6V
O
5 GND
+1
V
F1
_2
_3
V
F2
+4
8
V
CC
7
V
01
6
V
02
5 GND
6N135, 6N136, HCPL-2503, HCPL-4502
Pin 7 is not connected in
Part Number HCPL-4502
HCPL-2530/HCPL-2531
DESCRIPTION
The HCPL-4502/HCPL-2503, 6N135/6 and HCPL-2530/HCPL-2531 optocouplers consist of an AlGaAs LED optically coupled to a
high speed photodetector transistor.
A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional
phototransistor optocouplers by reducing the base-collector capacitance of the input transistor.
An internal noise shield provides superior common mode rejection of 10kV/µs. An improved package allows superior insulation
permitting a 480 V working voltage compared to industry standard of 220 V.
FEATURES
• High speed-1 MBit/s
• Superior CMR-10 kV/µs
• Dual-Channel HCPL-2530/HCPL-2531
• Double working voltage-480V RMS
• CTR guaranteed 0-70°C
• U.L. recognized (File # E90700)
APPLICATIONS
• Line receivers
• Pulse transformer replacement
• Output interface to CMOS-LSTTL-TTL
• Wide bandwidth analog coupling
© 2004 Fairchild Semiconductor Corporation
Page 1 of 12
11/2/04






6N135 Datasheet, Funktion
HIGH SPEED
TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135
DUAL-CHANNEL: HCPL-2530
6N136
HCPL-2531
HCPL-2503
HCPL-4502
ISOLATION CHARACTERISTICS (TA = 0 to 70°C Unless otherwise specied)
Characteristics
Test Conditions
Symbol Min Typ** Max Unit
Input-output
insulation leakage current
Withstand insulation test voltage
Resistance (input to output)
Capacitance (input to output)
DC Current gain
Input-Input
Insulation leakage current
Input-Input Resistance
Input-Input Capacitance
(Relative humidity = 45%)
(TA = 25°C, t = 5 s)
(VI-O = 3000 VDC)
(Note 9)
(RH 50%, TA = 25°C)
(Note 9) ( t = 1 min.)
(Note 9) (VI-O = 500 VDC)
(Note 9) (f = 1 MHz)
(IO = 3 mA, VO = 5 V)
(RH 45%, VI-I = 500 VDC) (Note 10)
t = 5 s, (HCPL-2530/2531 only)
(VI-I = 500 VDC) (Note 10)
(HCPL-2530/2531 only)
(f = 1 MHz) (Note 10)
(HCPL-2530/2531 only)
II-O
VISO
RI-O
CI-O
HFE
II-I
RI-I
CI-I
1.0 µA
2500
1012
0.6
150
0.005
1011
0.03
VRMS
pF
µA
pF
Notes
1. Derate linearly above 70°C free-air temperature at a rate of 0.8 mA/°C.
2. Derate linearly above 70°C free-air temperature at a rate of 1.6 mA/°C.
3. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C.
4. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C.
5. Current Transfer Ratio is dened as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%.
6. The 4.1 kload represents 1 LSTTL unit load of 0.36 mA and 6.1kpull-up resistor.
7. The 1.9 kload represents 1 TTL unit load of 1.6 mA and 5.6 kpull-up resistor.
8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the
common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO>2.0 V). Common mode
transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode
pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO<0.8 V).
9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted
together.
10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
I
© 2004 Fairchild Semiconductor Corporation
Page 6 of 12
11/2/04

6 Page









6N135 pdf, datenblatt
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
FAST
ISOPLANAR™
Power247™
Stealth™
ActiveArray™ FASTr™
LittleFET™
PowerEdge™
SuperFET™
Bottomless™ FPS™
MICROCOUPLER™ PowerSaver™
SuperSOT™-3
CoolFET™
FRFET™
MicroFET™
PowerTrench
SuperSOT™-6
CROSSVOLTGlobalOptoisolator™ MicroPak™
QFET
SuperSOT™-8
DOME™
GTO™
MICROWIRE™
QS™
SyncFET™
EcoSPARK™ HiSeC™
MSX™
QT Optoelectronics™ TinyLogic
E2CMOS™
I2C™
MSXPro™
Quiet Series™
TINYOPTO™
EnSigna™
i-Lo
OCX™
RapidConfigure™
TruTranslation™
FACT™
ImpliedDisconnect™ OCXPro™
FACT Quiet Series™
OPTOLOGIC
RapidConnect™
µSerDes™
UHC™
UltraFET
Across the board. Around the world.™ OPTOPLANAR™
The Power Franchise
PACMAN™
Programmable Active Droop™
POP™
SILENT SWITCHERVCX™
SMART START™
SPM™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TOANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOTASSUMEANY LIABILITY
ARISING OUT OF THEAPPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT
CONVEYANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTENAPPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
2. A critical component is any component of a life
systems which, (a) are intended for surgical implant into
support device or system whose failure to perform can
the body, or (b) support or sustain life, or (c) whose
be reasonably expected to cause the failure of the life
failure to perform when properly used in accordance
support device or system, or to affect its safety or
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
effectiveness.
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. I13

12 Page





SeitenGesamt 12 Seiten
PDF Download[ 6N135 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
6N134Hermetically Sealed / High Speed / High CMR / Logic Gate OptocouplersHewlett-Packard
Hewlett-Packard
6N135High Speed OptocouplersLITE-ON
LITE-ON
6N135High Speed OptocouplerVishay
Vishay
6N135IRED & PHOTO IC (DIGITAL LOGIC ISOLATION)Toshiba Semiconductor
Toshiba Semiconductor
6N135HIGH SPEED TRANSISTOR OPTOCOUPLERSQT Optoelectronics
QT Optoelectronics

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche