Datenblatt-pdf.com


65017 Schematic ( PDF Datasheet ) - Micropac Industries

Teilenummer 65017
Beschreibung HIGH RELIABILITY HALL EFFECT SENSOR LATCHING OUTPUT
Hersteller Micropac Industries
Logo Micropac Industries Logo 




Gesamt 2 Seiten
65017 Datasheet, Funktion
65017-001
Rev A 12/17/01
HIGH RELIABILITY HALL EFFECT SENSOR
LATCHING OUTPUT
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
Applications:
Wide operating temperature range -55 ºC to +150 ºC Solid state switch
High magnetic sensitivity
Motor controls
Low current CMOS Technology
Speed sensing
Wide operating voltage range 3.5 to 15 V
Angular Position sensing
Chopper stabilized amplifier minimizes amplifier
Linear Position Sensing
offset resulting in improved temperature stability
Current Sensing
DESCRIPTION
The 65017-001 Hall effect sensor detects the presence of a magnetic field and provides a switch output. It is
packaged in a hermetically sealed three pin ceramic package and can be used in many harsh environments. An
internal chopper stablized amplifier eliminates input offset voltages normally associated with bipolar devices
resulting in improved operating point stability. The output transistor will be “latched ON” in the presence of a
sufficiently strong South pole magnetic field facing the marked side of the package. The output will be “latched
OFF” in the presence of a resetting North pole magnetic field.
ABSOLUTE MAXIMUM RATINGS
Storage Temperature.......................................................................................................................................... .-65°C to +150°C
Operating Free-Air Temperature Range ............................................................................................................. -55°C to +150°C
Lead temperature 1.6 mm (1/16 inch) from case for 10 seconds.……......................…. ..................................................+260°C
Supply Voltage Range ............................................................................................................................................ 3.5 V to 15.0 V
Supply Current (Fault) .......................................................... ............................................................................................. 50 mA.
Power Dissipation, @ TA = 25°C (PD)…….…………………………..………………………..…………………… ...........…500 mW
MagneticFlux Density………. ................. …………………………………………..………………………………..Unlimited Output
ON Current (ISINK) .......... ………………………………………………………………………………………………………...…25mA
Package Dimensions
Schematic Diagram
1 23
REG.
HALL
CELL
1 Vcc
3 Output
2 Gnd
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E. Walnut St., Garland, TX 75040 (972) 272 - 3571 Fax (972) 487 - 6918
www.micropac.com E-MAIL: [email protected]





SeitenGesamt 2 Seiten
PDF Download[ 65017 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
6501ONE-CHIP MICROCOMPUTERCommodore
Commodore
65018-Bit Dual Supply Translating Transceiver with 3-STATE OutputsFairchild Semiconductor
Fairchild Semiconductor
65017HIGH RELIABILITY HALL EFFECT SENSOR LATCHING OUTPUTMicropac Industries
Micropac Industries
65017-001HIGH RELIABILITY HALL EFFECT SENSOR LATCHING OUTPUTMicropac Industries
Micropac Industries

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche