|
|
Número de pieza | 53259 | |
Descripción | POWER MOSFET OPTOCOUPLER 400V / 50ohm HERMETICALLY SEALED | |
Fabricantes | Micropac Industries | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 53259 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! 53259
POWER MOSFET OPTOCOUPLER
400V / 50Ω HERMETICALLY SEALED
Mii
MICROCIRCUITS DIVISION
Features:
• Hermetically Sealed 8-Pin Dual-In-Line
package
• Normally Closed Contact
• Performance over –55°C to +125°C Ambient
Temperature Range
• ±400 VDC Blocking Voltage in Bi-directional
Mode
• AC/DC Switching
• Maximum AC / DC Load Current: 0.12 A / 0.24 A
• 1500 VDC Withstand Test Voltage
• Optically Isolated
• 1.5 A Output Surge Current
• Same foot print as HSSR 7111 / Mii 53111
Applications:
• Satellite / Space Systems
• Military / High Reliability Systems
• Power Distribution Control
• AC/DC Electromechanical or Reed Relay
Replacement
• I/O Modules for Automated Test Equipment
• Process Control
• Telecom Applications
• Medical Electronics
DESCRIPTION
The 53259 is a single channel power MOSFET optocoupler. Low on-resistance of the MOSFET outputs, combined
with 1500 VDC isolation between input and output, makes this optocoupler ideal for many solid state relay
applications. Operation is specified over the full military temperature range. The part is supplied in an eight-pin,
dual-in-line ceramic package, available in variety of quality levels from COTS to class K including any custom
screening requirements. The basic data sheet part is environmentally screened to H level in accordance with Table
C-IX of MIL-PRF-38534. For ordering part number; consult with Micropac factory for detail. The part is normally
shipped with gold plated leads, but lead finishes per MIL-PRF-38534 are available.
Functionally, the device operates as a single-pole, normally closed (1 Form B) solid state relay. The device is
actuated by an input current, which can be supplied from standard logic types such as open-collector TTL. The
input current biases a light emitting diode that is optically coupled to an integrated photovoltaic diode array. The
photovoltaic array powers control circuitry that operates the output MOSFETs.
Optimum switching of either AC or DC loads is provided by a configurable output. For AC loads, connection A in
Figure 1 must be used. Connection A will also switch DC loads but connection B, in Figure 1, provides DC-only
operation with the advantages of substantial reduction in on-resistance and twice the output current capability as
that obtained with connection A.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: [email protected]
7/29/02
Pg. 1 of 6
1 page 53259
Power MOSFET Optocoupler
________________________________________________________________________________________
PULSE GEN
(SEE NOTE 1)
IF
IF
MONITOR
RM
200
1
+2
V- F 3
4
V DD
RL
VO
8 MONITOR
NODE
7
C L = 25 pF
6 (SEE NOTE 2)
5
GND
50%
IF
VO
PULSE
WIDTH
=
15 ms
90%
GND
50%
10%
t OFF
t ON
NOTES:
1. PULSE GENERATOR HAS THE FOLLOWING CHARACTERISTICS: OUTPUT IMPEDANCE = 50
AND tr= t f = 5.0 ns.
2. LOAD CAPACITANCE (CL) INCLUDES PROBE AND JIG CAPACITANCE.
Figure 3. Switching Test Circuit and Waveform.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: [email protected]
7/29/02
Pg. 5 of 6
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet 53259.PDF ] |
Número de pieza | Descripción | Fabricantes |
53250 | RADIATION TOLERANT 40VDC - 2A SOLID STATE RELAY | Micropac Industries |
53253 | RADIATION TOLERANT/ 90V - 0.8A DUAL POWER MOSFET OPTOCOUPLERS | Micropac Industries |
53254 | 40VDC - 10A SOLID STATE RELAY | Micropac Industries |
53255 | 400VDC - 10A SOLID STATE RELAY | Micropac Industries |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |