Datenblatt-pdf.com


42144 Schematic ( PDF Datasheet ) - Micropac Industries

Teilenummer 42144
Beschreibung RADIATION TOLERANT FULL BRIDGE POWER DRIVER HYBRID FOR 3-PHASE BRUSHLESS DC MOTORS
Hersteller Micropac Industries
Logo Micropac Industries Logo 




Gesamt 5 Seiten
42144 Datasheet, Funktion
PRELIMINARY DATA SHEET
42144
RADIATION TOLERANT FULL BRIDGE
POWER DRIVER HYBRID
FOR 3-PHASE BRUSHLESS DC MOTORS
Mii
MICROCIRCUITS PRODUCTS
DIVISION
Features:
Designed for 100 krad(Si) Total Dose
Hermetically Sealed Package
2A Peak Output Current
Built-in High-Side Gate Drive Circuit
N- and P-channel MOSFETs for Ease of Drive
Electrically Isolated Package
Interface Directly with UC1625 Motor Controller
Applications:
3-Phase BLDC Motor Control
Fin Actuator Control
Antenna Deployment Control
Mirror Position Control
X-Y Table Control
Gimbal Stabilization Platform
Guidance System
DESCRIPTION
The 42144 Full Bridge Power Driver Hybrid is designed for high reliability applications in harsh environment. This
compact design offers a full-bridge power driver stage for three-phase brushless DC motor applications. The
circuit is electrically isolated from the metal case for ease of mounting in the system. The hybrid package provides
two mounting ears for ease of assembly and low thermal resistance path. Each phase contains a high-side gate
drive circuit for the P-channel power MOSFET, a series gate resistor for the low-side N-channel power MOSFET,
and three Schottky diodes. The high-side gate drive circuit accepts an open-collector signal of the application
controller circuit and generates required gate voltage to operate the high-side MOSFET. The low-side gate resistor
will prevent any oscillations and minimize ringing. As an option, a Schottky diode in series with the low-side
MOSFET insures that braking current will not flow backward through the N-channel MOSFET. Sources of the low-
side MOSFETs are terminated individually allowing user to configure the desired current sensing option.
Micropac 42144 Full Bridge Power Driver Hybrid employed selected components that are capable to perform in
radiation environment with minimum degradation. The hybrid will perform over the full military temperature range
of –55°C to +125°C. It is fabricated using DSCC certified manufacturing processes that are fully in compliance with
MIL-PRF-38534. This device is available in a variety of quality levels from COTS to Class K including any custom
screening requirements. The basic data sheet part is environmentally screened to H level in accordance with
Table C-IX of MIL-PRF-38534.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VM ................................................................................................................................................60 VDC
Peak Pulsed Output Current (< 1% duty cycle) .................................................................................................... 5 A
Dielectric Withstanding Voltage ......................................................................................................................... 500 VDC
Storage Temperature Range ................................................................................................................. -65ºC to +150ºC
Operating Junction Temperature.......................................................................................................... -55ºC to +150ºC
Lead Solder Temperature for 10 seconds ............................................................................................................. 300ºC
Junction-to case thermal resistance, θJ-C.........................................................................................................TBD ºC/W
Case Temperature................................................................................................................................................... 125ºC
WEIGHT: .....................................................................................................................................TBD grams (typical)
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION 905 E. Walnut St., Garland, TX 75040 (972) 272-3571 Fax (972) 494-2281
www.micropac.com
E-MAIL: HYBRIDSALES @ MICROPAC.COM
5/22/02
Pg. 1 of 5





SeitenGesamt 5 Seiten
PDF Download[ 42144 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
42141POSITIVE REGULATOR + 5 VOLTSMicropac Industries
Micropac Industries
42142RADIATION TOLERANT POWER OPERATIONAL AMPLIFIERMicropac Industries
Micropac Industries
42143RADIATION TOLERANT POWER OPERATIONAL AMPLIFIERMicropac Industries
Micropac Industries
42144RADIATION TOLERANT FULL BRIDGE POWER DRIVER HYBRID FOR 3-PHASE BRUSHLESS DC MOTORSMicropac Industries
Micropac Industries

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche