Datenblatt-pdf.com


5KP110 Schematic ( PDF Datasheet ) - General Semiconductor

Teilenummer 5KP110
Beschreibung TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR
Hersteller General Semiconductor
Logo General Semiconductor Logo 




Gesamt 4 Seiten
5KP110 Datasheet, Funktion
5KP5.0 THRU 5KP110A
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Stand-off Voltage - 5.0 to 110 Volts Peak Pulse Power - 5000 Watts
Case Style P600
0.360 (9.1)
0.340 (8.6)
0.052 (1.32)
0.048 (1.22)
DIA.
1.0 (25.4)
MIN.
0.360 (9.1)
0.340 (8.6)
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
Available in uni-directional only
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Glass passivated junction
5000W peak pulse power
capability with a 10/1000µs waveform,
repetition rate (duty cycle): 0.05%
Excellent clamping capability
Low incremental surge resistance
Fast response time: typically less
than 1.0ps from 0 Volts to V(BR)
Devices with V(BR)>10V ID are typically ID less
than 1.0µA
High temperature soldering guaranteed:
265°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3 kg) tension
MECHANICAL DATA
Case: Molded plastic body over glass passivated junction
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: The color band denotes the cathode, which is
postitive with respect to the anode under normal TVS oper-
ation
Mounting Position: Any
Weight: 0.07 ounce, 2.1 grams
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Peak pulse power dissipation with a 10/1000µs
waveform (NOTE 1, FIG. 1)
Peak pulse current with a 10/1000µs
waveform (NOTE 1)
Steady state power dissipation at TL=75°C
lead lengths 0.375” (9.5mm) (NOTE 2)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
(JEDEC Method) (NOTE 3)
Instantaneous forward voltage at 100A, (NOTE 3)
Operating junction and storage temperature range
SYMBOL
PPPM
IPPM
PM(AV)
IFSM
VF
TJ, TSTG
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
(2) Mounted on copper pad area of 0.8 x 0.8” (20 x 20mm) per Fig. 5
(3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
VALUE
Minimum 5000
SEE TABLE 1
8.0
400
3.5
-55 to +175
UNITS
Watts
Amps
Watts
Amps
Volts
°C
1/21/99





SeitenGesamt 4 Seiten
PDF Download[ 5KP110 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
5KP11TRANSIENT ABSORPTION ZENERMicrosemi Corporation
Microsemi Corporation
5KP11TRANSZORB TRANSIENT VOLTAGE SUPPRESSORGeneral Semiconductor
General Semiconductor
5KP115000 Watt Transient Voltage Suppressors 5.0 to 110 VoltsMicro Commercial Components
Micro Commercial Components
5KP11GPP TRANSIENT VOLTAGE SUPPRESSORRectron Semiconductor
Rectron Semiconductor
5KP11TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSORDc Components
Dc Components

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche