Datenblatt-pdf.com


5962-9211701MPA Schematic ( PDF Datasheet ) - Analog Devices

Teilenummer 5962-9211701MPA
Beschreibung High Speed/ Low Power Dual Op Amp
Hersteller Analog Devices
Logo Analog Devices Logo 




Gesamt 8 Seiten
5962-9211701MPA Datasheet, Funktion
a
High Speed, Low Power
Dual Op Amp
AD827
FEATURES
HIGH SPEED
50 MHz Unity Gain Stable Operation
300 V/s Slew Rate
120 ns Settling Time
Drives Unlimited Capacitive Loads
EXCELLENT VIDEO PERFORMANCE
0.04% Differential Gain @ 4.4 MHz
0.19؇ Differential Phase @ 4.4 MHz
GOOD DC PERFORMANCE
2 mV max Input Offset Voltage
15 V/؇C Input Offset Voltage Drift
Available in Tape and Reel in Accordance with
EIA-481A Standard
LOW POWER
Only 10 mA Total Supply Current for Both Amplifiers
؎5 V to ؎15 V Supplies
PRODUCT DESCRIPTION
The AD827 is a dual version of Analog Devices’ industry-
standard AD847 op amp. Like the AD847, it provides high
speed, low power performance at low cost. The AD827 achieves
a 300 V/µs slew rate and 50 MHz unity-gain bandwidth while
consuming only 100 mW when operating from ± 5 volt power
supplies. Performance is specified for operation using ± 5 V to
± 15 V power supplies.
The AD827 offers an open-loop gain of 3,500 V/V into 500
loads. It also features a low input voltage noise of 15 nV/Hz,
and a low input offset voltage of 2 mV maximum. Common-
mode rejection ratio is a minimum of 80 dB. Power supply
rejection ratio is maintained at better than 20 dB with input
frequencies as high as 1 MHz, thus minimizing noise
feedthrough from switching power supplies.
The AD827 is also ideal for use in demanding video applica-
tions, driving coaxial cables with less than 0.04% differential
gain and 0.19° differential phase errors for 643 mV p-p into a
75 reverse terminated cable.
The AD827 is also useful in multichannel, high speed data
conversion systems where its fast (120 ns to 0.1%) settling time
is of importance. In such applications, the AD827 serves as an
input buffer for 8-bit to 10-bit A/D converters and as an output
amplifier for high speed D/A converters.
CONNECTION DIAGRAMS
8-Pin Plastic (N) and Cerdip
(Q) Packages
16-Pin Small Outline
(R) Package
20-Pin LCC (E) Package
APPLICATION HIGHLIGHTS
1. Performance is fully specified for operation using ± 5 V to
± 15 V supplies.
2. A 0.04% differential gain and 0.19° differential phase error at
the 4.4 MHz color subcarrier frequency, together with its low
cost, make it ideal for many video applications.
3. The AD827 can drive unlimited capacitive loads, while its
30 mA output current allows 50 and 75 reverse-
terminated loads to be driven.
4. The AD827’s 50 MHz unity-gain bandwidth makes it an
ideal candidate for multistage active filters.
5. The AD827 is available in 8-pin plastic mini-DIP and cerdip,
20-pin LCC, and 16-pin SOIC packages. Chips and MIL-
STD-883B processing are also available.
REV. B
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 617/329-4700
Fax: 617/326-8703






5962-9211701MPA Datasheet, Funktion
AD827
Figure 19. Crosstalk vs. Frequency
Figure 20. Crosstalk Test Circuit
INPUT PROTECTION PRECAUTIONS
An input resistor (resistor RIN of Figure 21a) is recommended in
circuits where the input common-mode voltage to the AD827
may exceed (on a transient basis) the positive supply voltage.
This resistor provides protection for the input transistors by
limiting the maximum current that can be forced into their
bases.
For high performance circuits, it is recommended that a second
resistor (RB in Figures 21a and 22a) be used to reduce bias-
current errors by matching the impedance at each input. This
resistor reduces the error caused by offset voltages by more than
an order of magnitude.
Figure 21a. Follower Connection
Figure 21b. Follower Large Signal
Pulse Response
Figure 21c. Follower Small
Signal Pulse Response
Figure 22a. Inverter Connection
Figure 22b. Inverter Large Signal
Pulse Response
Figure 22c. Inverter Small
Signal Pulse Response
–6– REV. B

6 Page







SeitenGesamt 8 Seiten
PDF Download[ 5962-9211701MPA Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
5962-9211701MPAHigh Speed/ Low Power Dual Op AmpAnalog Devices
Analog Devices

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche