Datenblatt-pdf.com


EN1HN1 Schematic ( PDF Datasheet ) - Vicor Corporation

Teilenummer EN1HN1
Beschreibung ENMods Component Power Front End System for EN Compliance
Hersteller Vicor Corporation
Logo Vicor Corporation Logo 




Gesamt 12 Seiten
EN1HN1 Datasheet, Funktion
PRELIMINARY
45
Features
Harmonic Current Attenuation to
EN61000-3-2
EMI Filtering to
EN55022, Level B
Transient Immunity to
EN61000-4-5
575W Rated Power Output
Autoranging 115/230Vac Input
Microprocessor Control
Inrush Current Limiting
Product Highlights
The ENMods system is a new AC front end
solution for compliance to electromagnetic
compatibility (EMC) standards. It consists of
the MiniHAM — a passive harmonic
attenuation module and the FARM3 — an
auto ranging AC-DC front end module.
Combined with the filtering and hold-up
capacitors as specified herein, the ENMods
system provides full compliance to:
EN61000-3-2 Harmonic Current
EN55022, Level B Conducted Emissions
EN61000-4-5 Surge Immunity
EN61000-4-11 Line Disturbances
Data Sheet
ENModsTM
Component Power
Front End System
for EN Compliance
Each module:
2.28 x 2.2 x 0.5 in
57,9 x 55,9 x 12,7 mm
Absolute Maximum Ratings
Parameter
L to N voltage (FARM3)
L to N voltage (FARM3)
+Out to –Out voltage (FARM3)
BOK to –Out voltage (FARM3)
EN to –Out voltage (FARM3)
Mounting torque
Pin soldering temperature
Pin soldering temperature
Output current
Rating
264
280
400
16
16
4-6(0.45 -0.68)
500 (260)
750 (390)
3.5
Unit
Vrms
Vrms
Vdc
Vdc
Vdc
in-lbs (N-m)
°F (°C)
°F (°C)
A
Notes
Continuous
100ms
6 each, 4-40 screw
<5 sec; wave solder
<7 sec; hand solder
The MiniHAM is the first passive product
specifically designed for compliance to EN
harmonic current limits. Unlike active PFC
solutions, the MiniHAM generates no EMI,
greatly simplifying and reducing system
noise filtering requirements. It is also
considerably smaller and more efficient than
active alternatives and improves MTBF by
an order of magnitude. Optimized for
operation on the DC bus (provided by the
FARM3) rather than directly on the AC line,
it will provide harmonic current compliance
up to 600W of input power at 230Vac.
The 115/230Vac input FARM3 is a new
member of Vicor’s Filter and Autoranging
Module product line that has been optimized
for use as the front end for the MiniHAM.
Both modules are in Vicor’s standard Mini
half-brick package. Together with Vicor’s
1st or 2nd Generation 300V input DC-DC
converters, they form the basis of a low
noise, high efficiency, rugged, simple and
reliable EN compliant power system.
Thermal Resistance
Parameter
Baseplate to sink; flat, greased surface
Baseplate to sink; with thermal pad (P/N 20264)
Baseplate to ambient
Baseplate to ambient; 1000 LFM
Typ
0.16
0.14
8.0
1.9
Unit
°C/Watt
°C/Watt
°C/Watt
°C/Watt
Part Numbering
EN1
C
1
Product
Type*
Product Grade
C = –20°C to +100°C
T = –40°C to +100°C
H = –40°C to +100°C
M = –55°C to +100°C
Pin Style**
1 = Short Pin
2 = Long Pin
S = Short ModuMate
N = Long ModuMate
1
Baseplate
1 = Slotted
2 = Threaded
3 = Thru-hole
*EN1 product includes one each MiniHAM and FARM3 with same product grade, pin and baseplate style.
**Pin styles S & N are compatible with the ModuMate interconnect system for socketing and surface mounting.
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
ENMods System: FARM3 and MiniHAM
Set your site on VICOR at www.vicorpower.com
Rev. 1.3
Page 1 of 12






EN1HN1 Datasheet, Funktion
PRELIMINARY
Operating Characteristics (Conducted emissions relative to EN55022 Reference Figure 1a)
Quasi Peak and Average Limits
Figure 8a —Peak detection
Figure 8b —Quasi peak detection
Figure 8c —Average detection
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
ENMods System: FARM3 and MiniHAM
Set your site on VICOR at www.vicorpower.com
Rev. 1.3
Page 6 of 12

6 Page









EN1HN1 pdf, datenblatt
Vicor’s comprehensive line of power solutions includes modular, high
density DC-DC converters and accessory components, configurable power
supplies, and custom power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is
assumed by Vicor for its use. No license is granted by implication or otherwise under any patent or patent
rights of Vicor. Vicor components are not designed to be used in applications, such as life support systems,
wherein a failure or malfunction could result in injury or death. All sales are subject to Vicor’s Terms and
Conditions of Sale, which are available upon request.
Specifications are subject to change without notice.
45 Component Solutions
for Your Power System
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
Email
Vicor Express: [email protected]
Technical Support: [email protected]
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 ENMods System: FARM3 and MiniHAM P/N 25260
Set your site on VICOR at www.vicorpower.com
Rev. 1.3 04/03/10M

12 Page





SeitenGesamt 12 Seiten
PDF Download[ EN1HN1 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
EN1HN1ENMods Component Power Front End System for EN ComplianceVicor Corporation
Vicor Corporation
EN1HN2ENMods Component Power Front End System for EN ComplianceVicor Corporation
Vicor Corporation
EN1HN3ENMods Component Power Front End System for EN ComplianceVicor Corporation
Vicor Corporation

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche