Datenblatt-pdf.com


FH12A-45S-0.5SH Schematic ( PDF Datasheet ) - Hirose Electric

Teilenummer FH12A-45S-0.5SH
Beschreibung 0.5mm and 1mm Pitch Connectors For FPC/FFC
Hersteller Hirose Electric
Logo Hirose Electric Logo 




Gesamt 19 Seiten
FH12A-45S-0.5SH Datasheet, Funktion
0.5mm and 1mm Pitch Connectors For FPC/FFC
FH12 Series
Flip-lock
sFeatures
1. Ease of Use and Space Savings
Only one finger or 6.9N (Newtons) of force is required to
lock Hirose’s rotational actuator (flip-lock) as compared
to using 2 fingers and 39.2N to close a FFC/FPC
connector from our competition.
The Flip-Lock design also allows customers to place 2
or more connectors side by side as there is no need to
waste additional board space for a side latch.
2. Strengthened Flip-lock Actuator
The standard Flip-Lock requires only 2.0mm height
above the board. A strengthened lock lever is available
which only requires an additional 0.4mm.
3. Supports Thin FPC (0.18mm)
Hirose does not require double-sided FPC to have any
additional strengthening plate or stiffener and can therefore
support a thickness of as little as 0.18mm +/- 0.05.
4. Hirose Ensures Reliability
Hirose’s patented half tuning fork contacts maintain the
required normal force without relying on the connector
housing. With our competitor’s conventional products
the housing walls support the contact force, which does
not provide for long-term reliability.
5. Prevention of Solder Bridge
Excess solder cavity absorbs excessive solder and
avoids solder bridging.
6. Three different assembly types
FH12 is offered in Top & Bottom Contact and Vertical
Mount and offered in both a 0.5mm contact pitch as well
as a 1.0mm contact pitch (bottom contact only).
sApplications
Notebook computers, printers, PDAs, digital cameras and
other compact devices for interconnecting the main circuit
board with the LCD, HDD or other device.
Rotating One-touch Mechanism
q
w
e
6






FH12A-45S-0.5SH Datasheet, Funktion
qVertical Mounting Type
Operation
1. FPC/FFC Termination procedure.
Connector installed on the board.
1) Verify that the actuator is positioned upright. If the
actuator has rotated to the side, carefully rotate it
upright.
Actuator upright
Precautions
1) Avoid forcing the actuator up or down without the
FPC/FFC inserted.
2) Insert the FPC/FFC vertically in the connector slot
assuring that the conductive traces of the
FPC/FFC are facing away from the actuator.
Stiffener
FPC/FFC conductive traces
Slot
3) Press down the actuator in the direction shown.
2. FPC/FFC Removal
Rotate the actuator upward and withdraw the
FPC/FFC.
11

6 Page









FH12A-45S-0.5SH pdf, datenblatt
BRecommended FPC/FFC dimensions and Land/Metal Mask dimensions
q0.5mm Pitch Product
FPC/FFC dimensions
Land / Metal Mask dimensions
B±0.1
C±0.1
0.5±0.1
0.5±0.05
A±0.05
B±0.07
0.35±0.03(FPC)
0.3±0.03(FFC)
C
0.5mm Pitch
Bottom Contact
Type
0.5mm Pitch
Top Contact
Type
Product Type
C Dimension
Types other than 0.3±0.05min
those below Stiffener thickness should be 0.188 mm (7.5 mil) min
Types with an FPC end
thickness of 0.18 mm
0.18±0.05
Unit: mm
Dimension
Number
A
of Contacts
Dimension
B Number
A
of Contacts
B
6 02.5 03.5 25 12.0 13.0
10 04.5 05.5
26 12.5 13.5
11 05.0 06.0
28 13.5 14.5
12 05.5 06.5
29 14.0 15.0
13 06.0 07.0
30 14.5 15.5
14 06.5 07.5
32 15.5 16.5
15 07.0 08.0
33 16.0 17.0
16 07.5 08.5
34 16.5 17.5
17 08.0 09.0
36 17.5 18.5
18 08.5 09.5
40 19.5 20.5
19 09.0 10.0
42 20.5 21.5
20 09.5 10.5
45 22.0 23.0
22 10.5 11.5
50 24.5 25.5
24 11.5 12.5
53 26.0 27.0
0.5±0.05
A±0.05
0.3±0.03(Land)
0.25±0.03(Metal mask)
Recommended metal mask thickness : 0.15mm
Unit: mm
Dimension
Dimension
Number
of Contacts
A B C Number
of Contacts
ABC
6 02.5 08.1 04.5 25 12.0 17.6 14.0
10 04.5 10.1 06.5 26 12.5 18.1 14.5
11 05.0 10.6 07.0 28 13.5 19.1 15.5
12 05.5 11.1 07.5 29 14.0 19.6 16.0
13 06.0 11.6 08.0 30 14.5 20.1 16.5
14 06.5 12.1 08.5 32 15.5 21.1 17.5
15 07.0 12.6 09.0 33 16.0 21.6 18.0
16 07.5 13.1 09.5 34 16.5 22.1 18.5
17 08.0 13.6 10.0 36 17.5 23.1 19.5
18 08.5 14.1 10.5 40 19.5 25.1 21.5
19 09.0 14.6 11.0 42 20.5 26.1 22.5
20 09.5 15.1 11.5 45 22.0 27.6 24.0
22 10.5 16.1 12.5 50 24.5 30.1 26.5
24 11.5 17.1 13.5 53 26.0 31.6 28.0
Even contact number
A±0.1
0.8±0.1(Land)
0.65±0.05(Metal mask)
No.1 contact
Odd contact number
A±0.1
0.8±0.1(Land)
0.65±0.05(Metal mask)
No.1 contact
0.5mm Pitch
Vertical
Mounting Type
0.5±0.1
0.5±0.05
A±0.05
B±0.07
0.35±0.03(FPC)
0.3±0.03(FFC)
*Set the stiffener thickness to 0.188 (7.5mil) min.
0.3±0.05
Unit: mm
Dimension
Number
A
of Contacts
Dimension
B Number
A
of Contacts
B
10 04.5 05.5
26 12.5 13.5
12 05.5 06.5
13 06.0 07.0
15 07.0 08.0
16 07.5 08.5
17 08.0 09.0
18 08.5 09.5
20 09.5 10.5
22 10.5 11.5
24 11.5 12.5
30 14.5 15.5
32 15.5 16.5
33 16.0 17.0
34 16.5 17.5
36 17.5 18.5
40 19.5 20.5
45 22.0 23.0
49 24.0 25.0
50 24.5 25.5
0.5±0.05
1±0.05
1±0.05
B±0.05
0.6±0.1(Land) 0.5±0.05
0.5±0.05(Metal mask) 1±0.05
1±0.05
1±0.05
B±0.05
0.6±0.1(Land)
0.5±0.05(Metal mask)
1±0.05
Recommended metal mask thickness : 0.15mm
Unit: mm
Dimension
Number
A
of Contacts
Dimension
B Number
A
of Contacts
B
10 06.5 04.5
26 14.5 12.5
12 07.5 05.5
13 08.0 06.0
15 09.0 07.0
16 09.5 07.5
17 10.0 08.0
18 10.5 08.5
20 11.5 09.5
22 12.5 10.5
24 13.5 11.5
30 16.5 14.5
32 17.5 15.5
33 18.0 16.0
34 18.5 16.5
36 19.5 17.5
40 21.5 19.5
45 24.0 22.0
49 26.0 24.0
50 26.5 24.5
17

12 Page





SeitenGesamt 19 Seiten
PDF Download[ FH12A-45S-0.5SH Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
FH12A-45S-0.5SH0.5mm and 1mm Pitch Connectors For FPC/FFCHirose Electric
Hirose Electric

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche