Datenblatt-pdf.com


LZ2364BJ Schematic ( PDF Datasheet ) - Sharp Electrionic Components

Teilenummer LZ2364BJ
Beschreibung 1/3-type CCD Area Sensors with 470 k Pixels
Hersteller Sharp Electrionic Components
Logo Sharp Electrionic Components Logo 




Gesamt 12 Seiten
LZ2364BJ Datasheet, Funktion
LZ2363B/LZ2364BJ
LZ2363B/
LZ2364BJ
1/3-type CCD Area Sensors
with 470 k Pixels
DESCRIPTION
The LZ2363B/LZ2364BJ are 1/3-type (6.0 mm)
solid-state image sensors that consist of PN photo-
diodes and CCDs (charge-coupled devices). With
approximately 470 000 pixels (795 horizontal x 595
vertical), the sensor provides a stable high-resolution
color (LZ2363B)/B/W (LZ2364BJ) image.
FEATURES
• Number of effective pixels : 752 (H) x 582 (V)
• Number of optical black pixels
– Horizontal : 3 front and 40 rear
– Vertical : 11 front and 2 rear
• Pixel pitch : 6.5 µm (H) x 6.3 µm (V)
• Mg, G, Cy, and Ye complementary color filters
(For LZ2363B)
• Low fixed-pattern noise and lag
• No burn-in and no image distortion
• Blooming suppression structure
• Built-in output amplifier
• Variable electronic shutter (1/50 to 1/10 000 s)
• Compatible with PAL standard (LZ2363B)/
CCIR standard (LZ2364BJ)
• Package :
16-pin half-pitch WDIP [Ceramic]
(WDIP016-N-0450)
Row space : 11.43 mm
PIN CONNECTIONS
16-PIN HALF-PITCH WDIP
TOP VIEW
ØV4 1
ØV3 2
ØV2 3
ØV1 4
GND 5
NC1 6
NC2 7
OS 8
16 ØH2
15 ØH1
14 ØLH1
13 ØRS
12 PW
11 OFD
10 GND
9 OD
(WDIP016-N-0450)
PRECAUTIONS
• The exit pupil position of lens should be more
than 25 mm (LZ2363B)/20 mm (LZ2364BJ) from
the top surface of the CCD.
• Refer to "PRECAUTIONS FOR CCD AREA
SENSORS" for details.
COMPARISON TABLE
TV standard
Characteristics
LZ2363B
LZ2364BJ
PAL standard (Color)
CCIR standard (B/W)
Refer to each following specification.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1






LZ2364BJ Datasheet, Funktion
LZ2363B/LZ2364BJ
PIXEL STRUCTURE
OPTICAL BLACK
,,yy,,yy,,yy,,yy,,yy,,yy,,yy,,yy,,yyOPTICALBLACK
,y,y,y,y,y,y,y,y,y(3PIXELS)
(2 PIXELS)
752 (H) x 582 (V)
1 pin
OPTICAL BLACK
(40 PIXELS)
,,,,yyyy,,,,yyyy,,,,yyyy,,,,yyyy,,,,yyyy,,,,yyyy,,,,yyyy,,,,yyyy,,,,yyyyOPTICALBLACK
(11 PIXELS)
COLOR FILTER ARRAY (FOR LZ2363B)
(1, 582)
Cy Ye Cy Ye Cy
Mg G Mg G Mg
Cy Ye Cy Ye Cy
G Mg G Mg G
Cy Ye Cy Ye Cy
Mg G Mg G Mg
(752, 582)
Ye Cy Ye Cy Ye
G Mg G Mg G
Ye Cy Ye Cy Ye
Mg G Mg G Mg
Ye Cy Ye Cy Ye
G Mg G Mg G
Cy Ye Cy Ye Cy
Mg G Mg G Mg
Cy Ye Cy Ye Cy
1st, 3rd
field
G Mg G Mg G
Cy Ye Cy Ye Cy
Mg G Mg G Mg
(1, 1)
Ye Cy Ye Cy Ye
G Mg G Mg G
Ye Cy Ye Cy Ye
Mg G Mg G Mg
Ye Cy Ye Cy Ye
G Mg G Mg G
2nd, 4th
field
(752, 1)
6

6 Page









LZ2364BJ pdf, datenblatt
3) To avoid generating static electricity,
a. do not scrub the glass surface with cloth or
plastic.
b. do not attach any tape or labels.
c. do not clean the glass surface with dust-
cleaning tape.
4) When storing or transporting the device, put it in
a container of conductive material.
3. Dust and Contamination
Dust or contamination on the glass surface could
deteriorate the output characteristics or cause a
scar. In order to minimize dust or contamination on
the glass surface, take the following precautions :
1) Handle the CCD in a clean environment such
as a cleaned booth. (The cleanliness level
should be, if possible, class 1 000 at least.)
2) Do not touch the glass surface with the fingers.
If dust or contamination gets on the glass
surface, the following cleaning method is
recommended :
ø Dust from static electricity should be blown
off with an ionized air blower. For anti-
electrostatic measures, however, ground all
the leads on the device before blowing off
the dust.
PRECAUTIONS FOR CCD AREA SENSORS
ø The contamination on the glass surface
should be wiped off with a clean applicator
soaked in Isopropyl alcohol. Wipe slowly and
gently in one direction only.
– Frequently replace the applicator and do not
use the same applicator to clean more than
one device.
◊ Note : In most cases, dust and contamination
are unavoidable, even before the device
is first used. It is, therefore, recommended
that the above procedures should be
taken to wipe out dust and contamination
before using the device.
4. Other
1) Soldering should be manually performed within
5 seconds at 350 °C maximum at soldering iron.
2) Avoid using or storing the CCD at high tem-
perature or high humidity as it is a precise
optical component. Do not give a mechanical
shock to the CCD.
3) Do not expose the device to strong light. For
the color device, long exposure to strong light
will fade the color of the color filters.
12

12 Page





SeitenGesamt 12 Seiten
PDF Download[ LZ2364BJ Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
LZ2364BJ1/3-type CCD Area Sensors with 470 k PixelsSharp Electrionic Components
Sharp Electrionic Components

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche