|
|
Número de pieza | CXD2073Q | |
Descripción | Digital Comb Filter (NTSC) | |
Fabricantes | Sony Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CXD2073Q (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! CXD2073Q
Digital Comb Filter (NTSC)
For the availability of this product, please contact the sales office.
Description
The CXD2073Q is an adaptive comb filter compatible
32 pin QFP (Plastic)
with NTSC system, and provide high-precision Y/C
separation with a single chip.
Features
• Y/C separation by adaptive processing
• Horizontal aperture compensation circuit
• 8-bit A/D converter (1 channel)
• 8-bit D/A converter (2 channels)
• One 1H delay line
• 4 PLL
• Clamp circuit
Absolute Maximum Ratings (Ta = 25°C, VSS = 0V)
• Supply voltage
DVDD VSS – 0.5 to +7.0 V
DAVD VSS – 0.5 to +7.0 V
ADVD VSS – 0.5 to +7.0 V
PLVD VSS – 0.5 to +7.0 V
• Input voltage
VI VSS – 0.5 to VDD +0.5 V
• Output voltage
VO VSS – 0.5 to VDD +0.5 V
• Operating temperature
Topr
–20 to +75 °C
• Storage temperature
Tstg –55 to +150 °C
Structure
Silicon gate CMOS IC
Applications
Y/C separation for color TVs and VCRs
Recommended Operating Conditions
• Supply voltage
DVDD
5.0 ± 0.25
DAVD 5.0 ± 0.25
ADVD 5.0 ± 0.25
PLVD
5.0 ± 0.25
• Operating temperature
Topr
–20 to +75
V
V
V
V
°C
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E97411B86-PS
1 page CXD2073Q
Clamp
Item
Clamp level∗1
∗1 Sync tip clamp
Symbol
CLV
Conditions
(VDD = 5V, Ta = 25°C, f = 10MHz)
Min. Typ. Max. Unit
— 0.67 — V
Description of Functions
• Horizontal aperture compensation
Compensates aperture degradation accompanied by D/A conversion.
This compensation is effective for the following modes; adaptive processing, Y through, and simple comb
modes.
• Switching of Y/C separation modes
The following four modes can be set; however, the adaptive processing mode or Y through mode is normally
used.
(1) Adaptive processing mode
This mode detects interline correlation, switches between comb filter processing and BPF processing,
and operates Y/C separation.
(2) Y through mode
The composite video signal input from ADIN (Pin 1) is A/D converted. It is also D/A converted, and then
output from AYO (Pin 7).
At this time, the output of ACO (Pin 4) is the same output as that of adaptive processing mode.
(3) BPF mode
C signal is generated by passing composite video signal through BPF.
Y output is a signal in which the C signal generated is subtracted from input composite video signal.
(4) Simple comb mode
Y/C separation is operated by the comb filter processing forcibly.
Modes
Adaptive processing mode
Y through mode
BPF mode
Simple comb mode
MOD1 (Pin 15)
L
L
H
H
MOD2 (Pin 14)
L
H
L
H
• Selection Pin Setting Table
Pin No.
14
15
16
26
31
Symbol
MOD2
MOD1
APCN
CKSL
CLPEN
HL
See the table above.
Horizontal aperture compensation ON
Internal 4-multiple PLL used
Internal clamp not used
Horizontal aperture compensation OFF
Internal 4-multiple PLL not used
Internal clamp used
–5–
5 Page Package Outline
Unit: mm
32PIN QFP (PLASTIC)
24
25
9.0 ± 0.2
+ 0.3
7.0 – 0.1
17
16
CXD2073Q
+ 0.35
1.5 – 0.15
0.1
32 9
18
+ 0.15
0.8 0.3 – 0.1
0.24 M
+ 0.2
0.1 – 0.1
+ 0.1
0.127 – 0.05
0° to 10°
SONY CODE
EIAJ CODE
JEDEC CODE
QFP-32P-L01
QFP032-P-0707
PACKAGE MATERIAL
LEAD TREATMENT
LEAD MATERIAL
PACKAGE MASS
EPOXY RESIN
SOLDER PLATING
42 ALLOY
0.2g
– 11 –
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet CXD2073Q.PDF ] |
Número de pieza | Descripción | Fabricantes |
CXD2073 | Digital Comb Filter (NTSC) | Sony Corporation |
CXD2073 | Digital Comb Filter (NTSC) | Sony Corporation |
CXD2073Q | Digital Comb Filter (NTSC) | Sony Corporation |
CXD2073S | Digital Comb Filter (NTSC) | Sony Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |