|
|
Número de pieza | AN6426NK | |
Descripción | Hands-free Speech Network IC | |
Fabricantes | Panasonic Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AN6426NK (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
No Preview Available ! ICs for Telephone
AN6426NK
Hands-free Speech Network IC
s Overview
The AN6426NK incorporates both speech network and
hands-free functions. Its well designed block configura-
tion allows realization of a hands-free telephone with a
minimal number of components.
s Features
• Incorporates all the functions required of a hands-free
telephone.
• Incorporates all the functions required of a handset.
• Complies with AC and DC impedance requirements.
• Provides a wide dynamic range.
• A noise detecting circuit prevents inadvertent transmis-
sion.
• Operation on an external power supply is available.
• Each mode can be easily controlled.
• A built-in loudspeaker amplifier can operated either on
line voltage or an external power supply.
Unit : mm
1 42
21
13.7±0.3
3 to 15°
15.3±0.25
22
0.96±0.25
4.5±0.25
4.76±0.25
+0.1
0.3 – 0.05
SDIP package with 42 pins (SDIP042-P-0600A)
s Block Diagram
38 39
37 –
Vrl
MA2
+
40
Vrl +
MA1
12 –
13
18
16
–
+
17
24
28 R
VB Log
27
Vrl Rec
11 Pre
VB
TATT
10
19 14
AP
T
VB Log
+
–
Buff-
er
VL VCC1 VCC2
15 41 42 36 34 29 6 5
Send
Power
Power
Power
Regulator
Regulator Regulator
+
–
VCC1
Vr1
GND
35 1
Matrix
Circuit
33
32
Matrix
Circuit
31
30
20
21
Attenator
Comp Control
Vr1 –
Rec.1
AP
Buffer
+
–
Rec.2
+ Vr1
9 78
2
AGC
–
S.Amp
+
Vr2
3 4 25
22
23
VB
RATT
26
1
1 page ICs for Telephone
s Pin Descriptions
1. Hand Set Communications Block (HSu)
[ Transmitter System]
Microphone amplifier
Input : pin3 (minus input), Output : Pin38 (collector out-
put)
The gain and frequency characteristics are determined by
the external resistors R19 (6.8kΩ)and R20 (43kΩ), and
capacitors C24 (0.068µF)and C25 (1,000pF).
R21 (2.2kΩ)is a resistor for the power supply for ECM.
AN6426NK
33
37 38
Transmitter selector switch
Input : Pin39 (speech), Pin40 (MF, holding tone)
The switch changes over transmitter input for hand set
communications, transmitter input for hand-free communi-
cations, and MF (Multi Frequency) input. The input impe-
dance at the Pin39 is 3.9kΩ and DC is VR (Pin34)
C33 (4.7µF) is a DC preventive capacitor. R22 (33kΩ) is
to adjust the input to the log amplifier. which is to detect
the transmission level. It attenuates the amplifier input to
3.9/(3.9+R22 (33kΩ)
The input impedance at the Pin40 is 3.35kΩ and DC is VR.
C34 is input through 10µF.
39
40
[Receiver System]
Receiver preamplifier
Input : Pin11(minus input), Output : Pin10 (collector out-
put)
The gain and frequency characteristics are determined by
the external resistors R5 (1kΩ)and R4 (22kΩ), and capac-
itors C8 (0.1µF)and C7 (3,300pF)
11
10
Receiver selector switch
Input : Pin10, Pin40
The switch changes over receiver input for hand set com-
munications and MF input.
Receiver automatic pad
Control : Pin33
Common with transmitter automatic pad
Receiver buffer amplifier
Output : Pin9
Outputs a receiver signal for hand-free communications at
low inpedance.
Transmitter automatic pad
Control : Pin33
Varies the transmitter/receiver gain by the value of the
current supplied to the IC. A variable point can be
moved by R18 (100kΩ). Increasing R18 causes AP to
start operation at a higher line current.
9
5
5 Page |
Páginas | Total 9 Páginas | |
PDF Descargar | [ Datasheet AN6426NK.PDF ] |
Número de pieza | Descripción | Fabricantes |
AN6426NK | Hands-free Speech Network IC | Panasonic Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |