|
|
PDF CXP864P60 Data sheet ( Hoja de datos )
| Número de pieza | CXP864P60 | |
| Descripción | CMOS 8-bit Single Chip Microcomputer | |
| Fabricantes | Sony Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CXP864P60 (archivo pdf) en la parte inferior de esta página. Total 22 Páginas | ||
|
No Preview Available !
CXP864P60
CMOS 8-bit Single Chip Microcomputer
Description
The CXP864P60 is the CMOS 8-bit single chip
microcomputer integrating on a single chip an A/D
converter, serial interface, timer/counter, time-base
timer, on-screen display function, I2C bus interface,
PWM output, remote control reception circuit,
HSYNC counter, watchdog timer, 32kHz timer/counter
besides the basic configurations of 8-bit CPU, PROM,
RAM, I/O ports.
The CXP864P60 also provides a sleep function that
enables to lower the power consumption.
The CXP864P60 is the PROM-incorporated version
of the CXP86460 with built-in mask ROM. This
provides the additional feature of being able to write
directly into the program. Thus, it is most suitable for
evaluation use during system development and for
small-quantity production.
64 pin SDIP (Plastic)
Structure
Silicon gate CMOS IC
64 pin QFP (Plastic)
Features
• A wide instruction set (213 instructions) which covers various types of data
— 16-bit operation/multiplication and division/Boolean bit operation instructions
• Minimum instruction cycle 250ns at 16MHz operation (4.5 to 5.5V)
122µs at 32kHz operation (2.7 to 5.5V)
• Incorporated PROM
60K bytes
• Incorporated RAM
1536 bytes (Excludes VRAM for on-screen display and sprite RAM)
• Peripheral functions
— A/D converter
8 bits 6 channels, successive approximation system
(Conversion time of 3.25µs at 16 MHz)
— Serial interface
8-bit clock sync type, 1 channel
— Timer
8-bit timer
8-bit timer/counter
19-bit time-base timer
32kHz timer/counter
— On-screen display (OSD) function 12 × 16 dots, 52 character types
15 character colors, 2 lines × 24 characters,
frame background 8 colors/ half blanking,
background on full screen 15 colors/ half blanking
edging/ shadowing/ rounding for every line,
background with shadow for every character, double scanning,
sprite OSD, 12 × 16 dots, 1 screen, 8 colors for every dot
— I2C bus interface
— PWM output
8 bits, 8 channels
14 bits, 1 channel
— Remote control reception circuit 8-bit pulse measurement counter, 6-stage FIFO
— HSYNC counter
2 channels
— Watchdog timer
• Interruption
13 factors, 13 vectors, multi-interruption possible
• Standby mode
Sleep
• Package
64-pin plastic SDIP/QFP
Perchase of Sony's I2C components conveys a licence under the Philips I2C Patent Rights to use these components
in an I2C system, provided that the system conforms to the I2C Standard Specifications as defined by Philips.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E96X13-PS
1 page  
CXP864P60
Pin Description
Symbol
PA0/AN0
to
PA5/AN5
PA6/VSYNC
PA7/HSYNC
PB0 to PB7
PC0 to PC5
PC6/PWM6 to
PC7/PWM7
PD0/INT2
PD1/SCK
PD2/SO
PD3/SI
PD4/HS0
PD5/HS1
PD6/RMC
PD7/EC
PE0/TO/ADJ
PE1/PWM
PE2/TEX/INT0
PE3/TX
PE4/YM
PE5/YS
PE6/I
B
G
R
I/O Description
I/O/
Analog input
I/O/Input
I/O/Input
I/O
(Port A)
8-bit I/O port.
I/O can be set in a
unit of single bits.
(8 pins)
Analog inputs to A/D converter.
(6 pins)
OSD display vertical sync signal input.
OSD display horizontal sync signal input.
(Port B)
8-bit I/O port. I/O can be set in a unit of single bits.
(8 pins)
I/O
Output/Output
I/O/Input
I/O/I/O
I/O/Output
I/O/Input
I/O/Input
I/O/Input
I/O/Input
I/O/Input
I/O/Output/
Output
I/O/Output
Input/Input/
Input
Input/Output
Output/Output
Output/Output
Output/Output
Output
Output
Output
(Port C)
Lower 6 bits are I/O ports; I/O can be set in a unit of single bits. Upper
2 bits are output port and open drain output of large current (12mA)
and N channel. Upper 2 bits are medium voltage drive (12V); lower 6
bits are 5V drive.
(8 pins)
8-bit PWM output.
(2 pins)
External interruption request input. Active at the
falling edge.
(Port D)
8-bit I/O port. I/O
can be set in a
unit of single bits.
Can drive 12mA
sync drive.
(8 pins)
Serial clock I/O.
Serial data output.
Serial data input.
HSYNC counter (CH0) input.
HSYNC counter (CH1) input.
Remote control reception circuit input.
External event input for timer/counter.
Rectangular wave output 32kHz oscillation
for 8-bit timer/counter. frequency dividing output.
(Port3 E)
Bits 0 and 1 are I/O
port; I/O can be set
in a unit of single.
Bits 2 and 3 are
input port. Bits 4, 5
and 6 are output
port.
(7 pins)
14-bit PWM output.
Connects a crystal for
32kHz timer/counter
clock oscillation. When
External interruption
request input. Active at
the falling edge.
used as an event
counter, input to TEX pin and leave TX pin open.
OSD display 6-bit output.
(6 pins)
–5–
5 Page 
CXP864P60
Absolute Maximum Ratings
(Vss = 0V reference)
Item
Symbol
Ratings
Unit
Remarks
Supply voltage
Input voltage
Output voltage
VDD
Vpp
VIN
VOUT
–0.3 to +7.0
–0.3 to +13.0
–0.3 to +7.0∗1
–0.3 to +7.0∗1
V
V Incorporated PROM
V
V
Medium drive output voltage VOUTP
–0.3 to +15.0
V
High level output current
IOH
–5 mA
High level total output current ∑IOH
–50 mA Total of all output pins
Low level output current
IOL
IOLC
15
mA
Ports excluding large current output
(value per pin)
20
mA
Large current output ports
(value per pin∗2)
Low level total output current ∑IOL
130 mA Total of all output pins
Operating temperature
Topr
–10 to +75
°C
Storage temperature
Tstg
–55 to +150
°C
Allowable power dissipation
PD
1000
600
mW SDIP-64P-01
mW QFP-64P-L01
∗1 VIN and VOUT should not exceed VDD + 0.3 V.
∗2 The large current output port is Port C (PC6, PC7), Port D (PD) and Port F (PF).
Note) Usage exceeding absolute maximum ratings may permanently impair the LSI. Normal operation should
be conducted under the recommended operating conditions. Exceeding those conditions may adversely
affect the reliability of the LSI.
Recommended Operating Conditions
(Vss = 0V reference)
Item
Symbol Min.
Max. Unit
Remarks
4.5
5.5
V
Guaranteed operation range for 1/2 and 1/4
frequency dividing clock
Supply voltage
VDD
3.5
5.5
V
Guaranteed operation range for 1/16 frequency
dividing clock or SLEEP mode
High level input
voltage
Low level input
voltage
VIH
VIHS
VIHEX
VIL
VILS
VILEX
2.7 5.5 V Guaranteed operation range by TEX clock
— — V Guaranteed data hold operation range during STOP∗5
0.7VDD
VDD
V ∗1
0.8VDD
VDD
V ∗2
VDD – 0.4 VDD + 0.3 V EXTAL pin∗3, TEX pin∗4
0 0.3VDD V ∗1
0 0.2VDD V ∗2
–0.3
0.4 V EXTAL pin∗4, TEX pin∗5
Operating temperature Topr –20 +75 °C
∗1 PA1 to 5, PB3 to 7, PC0 to PC5, PD2, PE0, PE1, PE3, PG3 to PG6, SCL0 to 1, SDA0 to 1 pins
∗2 VSYNC, HSYNC, INT2, SCK, SI, HS0, HS1, RMC, EC, INT0, INT1, RST, PB0, PB1, PB2 pins
∗3 Specifies only during external clock input.
∗4 Specifies only during external event count input.
∗5 This device does not enter the stop mode.
– 11 –
11 Page | ||
| Páginas | Total 22 Páginas | |
| PDF Descargar | [ Datasheet CXP864P60.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CXP864P60 | CMOS 8-bit Single Chip Microcomputer | Sony Corporation |
| CXP864P61 | CMOS 8-bit Single Chip Microcomputer | Sony Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |