Datenblatt-pdf.com


HS-303RH883S Schematic ( PDF Datasheet ) - Intersil Corporation

Teilenummer HS-303RH883S
Beschreibung Radiation Hardened CMOS Analog Switches
Hersteller Intersil Corporation
Logo Intersil Corporation Logo 




Gesamt 16 Seiten
HS-303RH883S Datasheet, Funktion
September 1995
HS-302RH/883S, HS-303RH/883S,
HS-306RH/883S, HS-307RH/883S,
HS-384RH/883S, HS-390RH/883S
Radiation Hardened
CMOS Analog Switches
Features
Description
• This Circuit is Processed in Accordance to Mil-Std-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• Radiation Hardened
- Functional Total Dose Exceeds 1 x 105 RAD Si
• Pin for Pin Compatible with Intersil HI-3XX Series
Analog Switches
• Analog Signal Range 15V
• Low Leakage
• Low RON
• No Latch Up
• Versions for 5V and 15V Digital Systems
• Low Operating Power
• Military Temperature Range -55oC to +125oC
Applications
• Sample and Hold i.e. Low Leakage Switching
• Op Amp Gain Switching i.e. Low ON Resistance
• Switched Capacitor Filters
• Low Level Switching Circuits
• Satellites
• Nuclear Reactor Controls
• Military Environments
The HS-3XXRH/883S family of analog switches are
monolithic devices fabricated using Radiation Hardened
CMOS technology and the Intersil dielectric isolation pro-
cess for latch-up free operation. Improved total dose hard-
ness is obtained by layout (thin oxide tabs extending to a
channel stop) and processing (hardened gate oxide). These
switches offer low-resistance switching performance for ana-
log voltages up to the supply rails. “ON” resistance is low
and stays reasonably constant over the full range of operat-
ing voltage and current. “ON” resistance also stays reason-
ably constant when exposed to radiation, being typically 30
pre-rad and 35post 100K RAD-Si. All devices provide
break-before-make switching.
The 6 devices in this switch series are differentiated by type
of switch action, pinout and digital logic levels. The HS-302/
303/384/390RH/883S switches have 5V digital inputs while
the HS-306/307RH/883S switches have 15V digital inputs.
All devices are available in Ceramic Flatpack and SBDIP
packages. The HS-3XXRH/883S switches can directly
replace the HI-3XX series devices.
Functional Diagram
IN N P
D
Ordering Information
PART NUMBER
HS1-302RH/883S
HS9-302RH/883S
HS1-302RH/Sample
HS9-302RH/Sample
HS1-303RH/883S
HS9-303RH/883S
HS1-303RH/Sample
HS9-303RH/Sample
HS1-306RH/883S ( Note 1)
HS9-306RH/883S ( Note 1)
TEMPERATURE RANGE
-55oC to +125oC
-55oC to +125oC
+25oC
+25oC
-55oC to +125oC
-55oC to +125oC
+25oC
+25oC
-55oC to +125oC
-55oC to +125oC
SCREENING LEVEL
PACKAGE
Intersil /883 Class S Equivalent 14 Lead SBDIP
Intersil /883 Class S Equivalent 14 Lead Ceramic Flatpack
Sample
14 Lead SBDIP
Sample
14 Lead Ceramic Flatpack
Intersil /883 Class S Equivalent 14 Lead SBDIP
Intersil /883 Class S Equivalent 14 Lead Ceramic Flatpack
Sample
14 Lead SBDIP
Sample
14 Lead Ceramic Flatpack
Intersil /883 Class S Equivalent 14 Lead SBDIP
Intersil /883 Class S Equivalent 14 Lead Ceramic Flatpack
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999 1
Spec Number 518526
File Number 3067.1






HS-303RH883S Datasheet, Funktion
Specifications HS-3XXRH/883S
TABLE 1. HS-306RH/307RH/883S DC ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Guaranteed and 100% Tested. Unless Otherwise Specified: V- = -15V, V+ = +15V, VAH = +11.0V, VAL = 3.5V (Continued)
PARAMETER
SYMBOL
CONDITIONS
GROUP A
SUB-
GROUPS
TEMPERATURE
LIMITS
MIN MAX UNITS
Positive Supply Current I(+) All Channels VA = 0V
1
+25oC
- 10 µA
2, 3
-55oC to +125oC
- 100 µA
All Channels VA = 15V
1
+25oC
- 10 µA
Negative Supply
Current
I(-) All Channels VA = 0V
2, 3
-55oC to +125oC
- 100 µA
1
+25oC
-10 -
µA
2, 3
-55oC to +125oC
-100
-
µA
All Channels VA = 15V
1
+25oC
-10 -
µA
2, 3
-55oC to +125oC
-100
-
µA
TABLE 2. HS-302RH/303RH/384RH/390RH/883S AC ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Guaranteed and 100% Tested. Unless Otherwise Specified: V- = -15V, V+ = +15V, VAH = +4.0V, VAL = 0V
PARAMETER
SYMBOL
CONDITIONS
GROUP A
SUB-
GROUPS
TEMPERATURE
LIMITS
MIN MAX UNITS
Break-Before-Make
Time Delay (HS-303RH
& 390RH Only)
TOPEN
RL = 300, VS = +3V,
VAH = 5V
9
10, 11
+25oC
-55oC to +125oC
30 150
- 300
ns
ns
Switch Turn “On” Time
TON
RL = 300, VS = +3V
9
+25oC
- 300 ns
10, 11
-55oC to +125oC
- 500 ns
Switch Turn “Off” Time
TOFF RL = 300, VS = +3V
9
+25oC
- 250 ns
10, 11
-55oC to +125oC
- 450 ns
TABLE 2. HS-306RH/307RH/883S AC ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Guaranteed and 100% Tested. Unless Otherwise Specified: V- = -15V, V+ = +15V, VAH = +15.0V, VAL = 0V
PARAMETER
SYMBOL
CONDITIONS
GROUP A
SUB-
GROUPS
TEMPERATURE
LIMITS
MIN MAX UNITS
Break-Before-Make
Time Delay (HS-307RH
Only)
TOPEN
RL = 300, VS = +3V
9
10, 11
+25oC
-55oC to +125oC
30 150
- 300
ns
ns
Switch Turn “On” Time
TON
RL = 300, VS = +3V
9
+25oC
- 300 ns
10, 11
-55oC to +125oC
- 500 ns
Switch Turn “Off” Time
TOFF RL = 300, VS = +3V
9
+25oC
- 250 ns
10, 11
-55oC to +125oC
- 450 ns
Spec Number 518526
6

6 Page









HS-303RH883S pdf, datenblatt
HS-302RH/303RH/306RH/307RH/384RH/390RH/883S
Irradiation Circuits
NC
1
R1 S3
2
R2 D3
3
R3 D1
4
R4 S1
5
IN1
6
GND
7
V+
14
S4
13
D4
12
D2
11
R8
R7
R6
S2 R5
10
IN2
9
V-
8
V1
V3
V2
NC
1
R1 S3
2
R2 D3
3
R3 D1
4
R4 S1
5
IN1
6
GND
7
V+
14
S4
13
D4
12
D2
11
R8
R7
R6
S2 R5
10
IN2
9
V-
8
V1
V3
V2
HS-302RH/303RH/883S
HS-384RH/390RH/883S
NOTES:
1. R1 - R8 = 10kΩ ± 5%, 1/4W
2. V1 = +15V ± 10%
3. V2 = -15V ± 10%
4. V3 = +5V ± 10%
5. All irradiation testing is performed in the 14 pin package.
HS-306RH/307RH/883S
NOTES:
1. R1 - R8 = 10kΩ ± 5%, 1/4W
2. V1 = +15V ± 10%
3. V2 = -15V ± 10%
4. V3 = +12V ± 10%
5. All irradiation testing is performed in the 14 pin package.
Burn-In Circuits
VA V-
V+
NC 1
2
R
3
R
4
5
6
7
14
C
13
R
12
R
11
V+
D
10
9
8 V-
CD
R
1
2
R
3
4
5
R
6
7
R
8
16
15 VA
14 -V
13 D C
12 D C
11 +V
10
9
STATIC CONFIGURATION
HS-302RH/303RH/306RH/307RH/883S
NOTES:
1. R = 10KΩ ± 5%, 1/4W (4 per position)
2. C = 0.01µF minimum (per position) or 0.1µF minimum per row
3. D = IN4002 (or equivalent)
4. +V = +15.5V ± 0.5V, -V = -15.5V ± 0.5V
5. VA = +15.5V ± 0.5V for 306RH/307RH
6. VA = +5.5V ± 0.5V for 302RH/303RH
STATIC CONFIGURATION
HS-384RH/390RH/883S
NOTES:
1. R = 10KΩ ± 5%, 1/4W (4 per position)
2. C = 0.01µF minimum (per position) or 0.1µF minimum per row
3. D = IN4002 (or equivalent)
4. +V = +15.5V ± 0.5V, -V = -15.5V ± 0.5V
5. VA = +5.5V ± 0.5V
Spec Number 518526
12

12 Page





SeitenGesamt 16 Seiten
PDF Download[ HS-303RH883S Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
HS-303RH883SRadiation Hardened CMOS Analog SwitchesIntersil Corporation
Intersil Corporation

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche