Datenblatt-pdf.com


HT-30-1 Schematic ( PDF Datasheet ) - Hirose Electric

Teilenummer HT-30-1
Beschreibung Stripline Mounting Non-reflective Terminations
Hersteller Hirose Electric
Logo Hirose Electric Logo 




Gesamt 5 Seiten
HT-30-1 Datasheet, Funktion
Stripline Mounting Non-reflective Terminations
HT Series
HT-30-1
HT-50-1
HT-10-2
HT-20-3
HT-1-3
HT-1-2
HT-1-1 HT-025-1 HT-05-2 HT-025-2
sFeatures
1.High Performance
These super wide bandwidth/ultra high matching
non-reflective termination use Hirose Electric
original high frequency matching technology.
2.Equipped with Tabs
Termination are equipped with tabs to permit direct
mounting to flat circuits.
3.Housing functions as a radiator to
permit small size and high-density
mounting.
sProduct Specifications
Ratings
Rated frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
DC to 15.0 GHz
50 ohms
0.25 to 50 W
Operating temperature range
Operating relative humidity
NOTE: The frequency range and the maximum input power will differ depending on the products.
-10ç to +60ç
95% Max.
HT-025-1, HT-025-2, HT-05-2, HT-1-1, HT-1-2, HT-1-3, HT-10-2, HT-20-3, and HT-50-1
Item
Standard
Conditions
1.Vibration
2.Shock
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
3.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 490 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡15 max. (Minutes)
200 cycles
HT-30-1
Item
Standard
Conditions
1.Vibration
2.Shock
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
3.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 294 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç ¡ +5ç to +35ç ¡ +120ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡15 max. (Minutes)
200 cycles
sMaterials
HT-025-1, HT-025-2, and HT-05-2
HT-1-1, HT-1-2, and HT-1-3
Part
Tabs
Resistor
HT-30-1
Part
Plate
Retaining plate
Tabs
Resistor
Material
Copper
Metal film
Finish
Solder plating
----------
Material
Aluminum
Phosphor bronze
Copper
Metal film
Finish
Conductive alumite
Nickel plating
Tin plating
----------
Part
Plate
Tabs
Resistor
Material
Aluminum
Copper
Metal film
Finish
Nickel plating
Solder plating
----------
HT-10-2, HT-20-3, and HT-50-1
Part Material
Plate
Copper
Tabs
Copper
Resistor
Metal film
Finish
Nickel plating
Silver plating
----------
72





SeitenGesamt 5 Seiten
PDF Download[ HT-30-1 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
HT-30-1Stripline Mounting Non-reflective TerminationsHirose Electric
Hirose Electric

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche