Datenblatt-pdf.com


ADC-8032A-S Schematic ( PDF Datasheet ) - ETC

Teilenummer ADC-8032A-S
Beschreibung Analog Composite to SDI Decoder
Hersteller ETC
Logo ETC Logo 




Gesamt 30 Seiten
ADC-8032A-S Datasheet, Funktion
Ross Video Limited
ADC-8032A
ADC-8032A-S
Analog Composite
to SDI Decoder
User Manual
www.DataSheet4U.com
Ross Part Number: 8032AD-004
Issue: 04






ADC-8032A-S Datasheet, Funktion
Overview ................................................................................................................. 6-1
Cable Construction .................................................................................................. 6-2
Connection and Configuration ................................................................................ 6-3
Specifications
7-1
In This Chapter ...................................................................................................................... 7-1
Technical Specifications.......................................................................................... 7-2
Ordering Information
8-1
In This Chapter ...................................................................................................................... 8-1
ADC-8032A and Related Products ......................................................................... 8-1
Warranty and Repair Policy .................................................................................... 8-2
www.DataSheet4U.com
ii Contents
ADC-8032A User Manual (Iss. 04)

6 Page









ADC-8032A-S pdf, datenblatt
Jumper Setup
Use the following steps to set up ADC-8032A jumpers. These steps are performed before installing
the unit in the frame, but may be repeated as required. Refer to Figure 2 for card jumper locations.
www.DataSheet4U.com
Figure 2. ADC-8032A Jumper Locations
1. Using the figure above and the card silk-screening, set JP5 (Input Select) to select
the input video standard:
Set jumper on pins 1-4 (Auto) to automatically select between
NTSC and PAL (default setting)
Set jumper on pins 2-5 (PAL-M) for PAL-M decoding
Set jumper on pins 3-6 (PAL-N) for PAL-N decoding
2. An analog composite reference is required for Line Sync and Frame Sync modes.
Using the figure above and the card silk-screening, set Jumper JP3 (Ext Ref) to
determine the location from which you want to obtain external reference.
Set jumper on pins 1-2 (Frame) to obtain the reference from the frame’s
master reference (analog reference) connector (default setting)
Set jumper on pins 2-3 (O/P8) to obtain the reference from connector 8 on
the back-plane
3. (Optional) Using the figure above and the card silk-screening, set Jumper JP4
(269M Fault Reporting) to enable or disable the card’s SMPTE alarm:
Set jumper on pins 1-2 (EN) to enable SMPTE fault reporting (default
setting)
Set jumper on pins 2-3 (DIS) to disable SMPTE fault reporting
(See Chapter 5, “SMPTE 269M Fault Reporting” for details on fault reporting.)
2-2 Installation and Setup
ADC-8032A User Manual (Iss. 04)

12 Page





SeitenGesamt 30 Seiten
PDF Download[ ADC-8032A-S Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
ADC-8032A-SAnalog Composite to SDI DecoderETC
ETC

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche