Datenblatt-pdf.com


AT-1320 Schematic ( PDF Datasheet ) - Hirose Electric

Teilenummer AT-1320
Beschreibung High Power Fixed Attenuators (Heat sink Mounting Type)
Hersteller Hirose Electric
Logo Hirose Electric Logo 




Gesamt 2 Seiten
AT-1320 Datasheet, Funktion
High Power Fixed Attenuators (Heat sink Mounting Type)
AT-1200 and AT-1300 Series
AT-1210-H J
AT-1320-H J
sFeatures
1.Small Size and Economical
Beryllia is used for the material of the resistance
element to enable the attenuation to be of small
size and low cost.
2.High Power Capacity
Mounting these attenuators to a heat sink permits the
AT-1200 Series to be used at up to 30 W and the AT-
1300 Series to be used at up to 50 W.
3.High Reliability
These attenuators show stable characteristics for
environments of varying temperature, humidity, and
gases.
sProduct Specifications
Ratings
Frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
DC to 2.0 GHz
50 ohms
30 to 50 W
Operating temperature range
Operating relative humidity
Note: The frequency range and the maximum input power will differ depending on the products.
-10ç to +65ç
95% Max.
Item
1.Vibration
2.Shock
Standard
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
3.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Conditions
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 490 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes)
200 cycles
sMaterials
Part
Connector Body
Body
Female contacts
Insulation
Attenuation element
Material
Stainless steel
Aluminum
Beryllium copper
PTFE
Metal film
Finish
Passivated
Conductive white alumite
Gold plating
----------
----------
sOrdering Information
AT - 12 10 - H J
1 23
4
1 AT: Indicates a fixed attenuator
2 Indicates the Series Name
(Maximum Usable Power)
12: HRM type plug - jack 30W
13: N type plug - jack 50W
3 Attenuation
10 : 10dB
20 : 20dB
4 Coupling Portion
H J : SMA type jack - jack
N H : N type jack - SMA type jack
88





SeitenGesamt 2 Seiten
PDF Download[ AT-1320 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
AT-1320High Power Fixed Attenuators (Heat sink Mounting Type)Hirose Electric
Hirose Electric
AT-1320-HHigh Power Fixed Attenuators (Heat sink Mounting Type)Hirose Electric
Hirose Electric
AT-1320-JHigh Power Fixed Attenuators (Heat sink Mounting Type)Hirose Electric
Hirose Electric

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche