Datenblatt-pdf.com


A6011 Schematic ( PDF Datasheet ) - Tyco Electronics

Teilenummer A6011
Beschreibung 2000 TO 6000 MHz CASCADABLE AMPLIFIER
Hersteller Tyco Electronics
Logo Tyco Electronics Logo 




Gesamt 8 Seiten
A6011 Datasheet, Funktion
5895
8-BIT SERIAL-INPUT,
LATCHED DRIVERS
5895
UCN5895A
GROUND 1
CLOCK 2 CLK
SERIAL 3
DATA IN
SHIFT
REGISTER
STROBE 4 ST LATCHES
16
VDD 15
OE 14
VBB 13
SERIAL
DATA OUT
LOGIC
SUPPLY
OUTPUT
ENABLE
LOAD
SUPPLY
OUT1 5
12 OUT 8
OUT 2 6
11 OUT7
OUT3 7
10 OUT6
OUT 4 8
9 OUT5
Dwg. PP-026-2A
Note the UCN5895A (DIP) and the A5895SLW
(SOIC) are electrically identical and share a common
terminal number assignment.
ABSOLUTE MAXIMUM RATINGS
at TA = +25°C
Output Voltage, VOUT . . . . . . . . . . . . . . 50 V
Logic Supply Voltage Range,
VDD . . . . . . . . . . . . . . . . . . 4.5 V to 12 V
Driver Supply Voltage Range,
VBB . . . . . . . . . . . . . . . . . . 5.0 V to 50 V
Input Voltage Range,
VIN . . . . . . . . . . . -0.3 V to VDD + 0.3 V
Continuous Output Current,
IOUT . . . . . . . . . . . . . . . . . . . . . -250 mA
Allowable Package Power Dissipation,
PD . . . . . . . . . . . . . . . . . . . . See Graph
Operating Temperature Range,
TA . . . . . . . . . . . . . . . . . -20°C to +85°C
Storage Temperature Range,
TS . . . . . . . . . . . . . . . . -55°C to +150°C
Caution: CMOS devices have input-static
protection, but are susceptible to damage when
exposed to extremely high static electrical
charges.
BiMOS II 8-BIT SERIAL INPUT,
LATCHED SOURCE DRIVERS
The UCN5895A, UCN5895EP, and A5895SLW BiMOS II serial-
input, latched source drivers are designed for applications emphasiz-
ing low output saturation voltages and currents to -250 mA per output.
These smart high-side octal, driver ICs merge an 8-bit CMOS shift
register, associated CMOS latches, and CMOS control logic (strobe
and output enable) with medium current emitter-follower (sourcing)
outputs. Typical applications include incandescent or LED displays
(both directly driven and multiplexed), non-impact (i.e., thermal)
printers, relays, and solenoids.
Each device is suitable for high-side applications to -250 mA per
channel. The maximum supply voltage is 50 V and a minimum output
sustaining voltage rating of 35 V for inductive load applications. Under
normal operating conditions, the UCN5895A and UCN5895EP are
capable of providing -120 mA (8 outputs continuous and simultaneous)
at +65°C with a logic supply of 5 V. Similar devices, with higher output
current ratings, are the UCN5890A and UCN5891A.
BiMOS II devices can operate at greatly improved data-input rates.
With a 5 V supply, they will typically operate at better than 5 MHz.
At 12 V, significantly higher speeds are obtained.
The CMOS inputs provide for minimum loading and are compatible
with standard CMOS, PMOS, and NMOS circuits. TTL or DTL circuits
may require the use of appropriate pull-up resistors to ensure a proper
input-logic high. A CMOS serial data output allows cascading these
devices in multiple drive-line applications required by many dot matrix,
alphanumeric, and bar graph displays.
These devices are rated for continuous operation over the tem-
perature range of -20°C to +85°C. Because of limitations on package
power dissipation, the simultaneous operation of all output drivers may
require a reduction in duty cycle. The UCN5895A is supplied in a
standard 16-pin dual in-line plastic package with a copper lead frame
for increased allowable package power dissipation. The UCN5895EP
is supplied in a 20-lead plastic leaded chip carrier for minimum area,
surface-mount applications. The A5895SLW is supplied in a 16-lead
wide-body plastic SOIC.
FEATURES
s Low Output-Saturation Voltage
s Source Outputs to 50 V
s Output Current to -250 mA
s To 3.3 MHz Data-lnput Rate
s Low-Power CMOS Logic & Latches
Always order by complete part number, e.g., UCN5895A .






A6011 Datasheet, Funktion
5895
8-BIT SERIAL-INPUT,
LATCHED DRIVERS
16
0.280
0.240
UCN5895A
Dimensions in Inches
(controlling dimensions)
9
0.014
0.008
0.430
MAX
0.300
BSC
1
0.070
0.045
0.210
MAX
0.015
MIN
0.022
0.014
16
7.11
6.10
0.775
0.735
0.100
BSC
8
0.005
MIN
0.150
0.115
Dimensions in Millimeters
(for reference only)
9
Dwg. MA-001-16A in
0.355
0.204
10.92
MAX
7.62
BSC
1
1.77
1.15
5.33
MAX
19.68
18.67
2.54
BSC
8
0.13
MIN
0.39
MIN
0.558
0.356
NOTES: 1. Lead thickness is measured at seating plane or below.
2. Lead spacing tolerance is non-cumulative.
3. Exact body and lead configuration at vendor’s option within limits shown.
3.81
2.93
Dwg. MA-001-16A mm
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000

6 Page







SeitenGesamt 8 Seiten
PDF Download[ A6011 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
A60112000 TO 6000 MHz CASCADABLE AMPLIFIERTyco Electronics
Tyco Electronics
A6011Cascadable AmplifierMA-COM
MA-COM

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche