|
|
PDF 1A277A Data sheet ( Hoja de datos )
| Número de pieza | 1A277A | |
| Descripción | High-Performance LED(FM and Baseband Video) | |
| Fabricantes | Mitel Networks Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 1A277A (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
PRODUCT INFORMATION
880nm
1A277A
High-Performance LED
FM and Baseband Video
The low harmonic distortion and low
thermal droop makes this device ideal
for subcarrier FM and baseband video
applications. Video transmission can
be accomplished with minimum dis-
tortion. The double-lens optical sys-
tem provides for optimum coupling of
power into the fiber.
Optical and Electrical Characteristics (25°C Case Temperature)
PARAMETER
SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION
Fiber-Coupled Power
(Fig.1, 2,& 3) (Table 1)
Pfiber 100 130
W IF =100mA
(Note 1)
Fiber:
Rise and Fall Time
(10-90%)
Bandwidth
(3dBel )
Harmonic Distortion
(nonlinearity)
Thermal Droop
(nonlinearity) (Note 2)
tr, tf
fc
-H2
-H3
l⌬Pl
1.5 2 ns IF =100mA 62.5/125m
(no bias)
Graded
250 MHz IF =100 mA Index
40 dB ImF==01.080 mA NA=0.275
50 dB f=10 MHz
4 % IF =100 mA
Peak Wavelength
Spectral Width (FWHM)
Forward Voltage (Fig.5)
Reverse Current
Capacitance
p 860 880 900 nm IF =100 mA
⌬ 60 nm IF =100 mA
VF 1.8 2.2 V IF =100 mA
IR 20 A VR=1V
C 250 pF VR= 0V, f=1 MHz
Ø4.7
Ø1.5
0.6
3.7
14
0.4
CASE
CATHODE
ANODE
2.5
5.4
BOTTOM VIEW
The anode is in electrical contact with the case.
TO-46 Package With Lens
Note 1: Measured at the exit of 100 meters of fiber
Note 2: Transient decline in optical power due to self-heating.
Absolute Maximum Ratings
PARAMETER
Storage Temperature
Operating Temperature
Electrical Power Dissipation
Continuous Forward Current (fр10 kHz)
Peak Forward Current (duty cycleр50%, fу1 MHz)
Reverse Voltage
Soldering Temperature (2mm from the case for 10 sec)
SYMBOL
Tstg
Top
Ptot
IF
IFRM
VR
Tsld
LIMIT
-55 to +125ЊC
-55 to +125ЊC
250 mW
110 mA
180 mA
1.5 V
260ЊC
Thermal Characteristics
PARAMETER
SYMBOL MIN.
Thermal Resistance - Infinite Heat Sink Rthjc
Thermal Resistance - No Heat Sink
Rthja
Temperature Coefficient - Optical Power dP/dTj
Temperature Coefficient -Wavelength d /dTj
TYP.
-0.6
0.3
MAX.
100
400
UNIT
ЊC/W
ЊC/W
%/ЊC
nm/ЊC
12249.12 1994-09-20
Europe: Tel (46) 8 58 02 45 00 Fax (46) 8 58 02 01 10
Tel (44) 1291 436180 Fax (44) 1291 436771
America: Tel 1-800-96MITEL Fax (613) 592-6909
Asia:
Tel (65) 293 5312 Fax (65) 293 8527
1 page  
PRODUCT INFORMATION
ST-2A
Package
Emitter or Detector in ST® Package
Mitel emitters and detectors can be
provided in this low-profile ST®
package. The device is electrically
isolated from the ST® receptacle to
facilitate electrical connection. And
optimum fiber-coupled power or
responsivity is ensured by active
alignment against the fiber.
Absolute Maximum Ratings
PARAMETER
Operating & Storage Temperature
ST-2A (Note 1)
SYMBOL
Tstg, Top
Note 1: Temperature range can be extended to -55° to +125°C on request.
LIMIT
-40 to +85ЊC
Thermal Characteristics
PARAMETER
SYMBOL MIN. TYP. MAX.
Thermal Resistance - Infinite Heat Sink Rthcc
(Note 2)
40
Thermal Resistance - No Heat Sink
(Note 2)
Rthca
200
Thermal Resistance - On PC Board
(Note 2)
Rthca
80
Note 2: Add Rthjc for emitter or detector to estimate the total thermal resistance.
UNIT
ЊC/W
ЊC/W
ЊC/W
2-56 UNC - 2B
max.0.5
3/8"-32 UNEF
Ø2.502
+0.01
0
FIBER
END
0.006
7.6 3.9
min.12
5.4
20.1
Ø2.5
+0
-0.004
7.89
MATING FERRULE*
(not included)
All Dimensions in mm
*The fiber-coupled power/responsivity is guaranteed to meet the LED/PIN data sheet - provided a ferrule meeting this specification is used.
Mechanical Outline of Diode in ST-2A Housing
(ST is a registered trademark of AT&T)
103326 1994-09-20
Europe: Tel (46) 8 58 02 45 00 Fax (46) 8 58 02 01 10
Tel (44) 1291 436180 Fax (44) 1291 436771
America: Tel 1-800-96MITEL Fax (613) 592-6909
Asia:
Tel (65) 293 5312 Fax (65) 293 8527
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet 1A277A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 1A277A | High-Performance LED(FM and Baseband Video) | Mitel Networks Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |