|
|
Teilenummer | 5KP100A |
|
Beschreibung | Transient Voltage Suppression Diodes | |
Hersteller | Littelfuse | |
Logo | ||
Gesamt 6 Seiten 5KP Series
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
RoHS
Pb e3
Uni-directional
Bi-directional
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Peak Pulse Power Dissipation by
10/1000μs Test Waveform (Fig.2)
(Note 1)
Steady State Power Dissipation on
Infinite Heat Sink at TL=75ºC
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
Only (Note 2)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
Only (Note 3)
Operating Junction and Storage
Temperature Range
Typical Thermal Resistance
Junction to Lead
Typical Thermal Resistance
Junction to Ambient
Symbol
PPPM
PD
IFSM
VF
TJ, TSTG
RθJL
RθJA
Value
5000
8.0
400
3.5/5.0
-55 to 175
8.0
40
Unit
W
W
A
V
°C
°C/W
°C/W
Notes:
1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts.
Functional Diagram
Description
The 5KP Series is designed specifically to protect sensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.
Features
• 5000W peak pulse
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Glass passivated chip
junction in P600 package
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
• Excellent clamping
capability
• Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC-61000-4-2 ESD
30kV(Air), 30kV (Contact)
• E SD protection of data
lines in accordance with
IEC 61000-4-2
• E FT protection of data
lines in accordance with
IEC 61000-4-4
• Low incremental surge
resistance
•
TwyhpeicnaVl IBRR
less than
min>12V
2μA
• High temperature
to reflow soldering
guaranteed: 260°C/40sec
/ 0.375”, (9.5mm) lead
length, 5 lbs., (2.3kg)
tension
• Vx(αBR(1T@:+TαeTmJT=pxVeB(rTRa@Jtu-2r25e5°C))
Coefficient, typical value
is 0.1%)
• Plastic package is
flammability rated V-0 per
Underwriters Laboratories
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
• Pb-free E3 means 2nd
level interconnect is
Pb-free and the terminal
finish material is tin(Sn)
(IPC/JEDEC J-STD-
Applications
TVS devices are ideal for the protection of I/O interfaces,
cVoCCmbpuustearn, dinodtuhsetrriavlualnnedracbolnescuimrcueirtseluescetrdoninictealpepcloicmat,ions.
Additional Infomarion
Cathode
Bi-directional
Uni-directional
Anode
Datasheet
Resources
Samples
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
Part Numbering System
5KPxxx XX X
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A
CA
BUin-Di-Direircetciotinoanla(l5(%5%VBVRBVRoVlotaltgaegeToTloelrearnacnec)e)
VR VOLTAGE
SERIES CODE
Part Marking System
Cathode Band
(for Uni-directional
products only)
Littelfuse Logo
YYWW
5KPXXX
Trace Code Marking
YY:Year Code
WW: Week Code
Product Type
Packing Options
Part Number
5KPxxxXX
Component
Package
P600
Quantity
800
Packaging
Option
Packaging Specification
Tape & Reel EIA STD RS-296
5KPxxxXX-B
P600
100
BULK
Littelfuse Spec.
Tape and Reel Specification
2.56
(65.0)
0.394+/-0.020
(10.0+/-0.5)
13.0
(330.2)
3.0
(76.2)
2.75
(69.85)
0.68
(17.27)
Off Center
either side
0.028(0.7)
2.063+0.079/-0.039
(53.0+2.0/-1.0)
0.047
(1.2)
0.236
(6.0)
Dimensions are in
inches/mm
Recess Depth Max. 0.75 (19.05)
Direction of Feed
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
6 Page | ||
Seiten | Gesamt 6 Seiten | |
PDF Download | [ 5KP100A Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
5KP100 | TRANSIENT ABSORPTION ZENER | Microsemi Corporation |
5KP100 | TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR | General Semiconductor |
5KP100 | 5000 Watt Transient Voltage Suppressors 5.0 to 110 Volts | Micro Commercial Components |
5KP100 | GPP TRANSIENT VOLTAGE SUPPRESSOR | Rectron Semiconductor |
5KP100 | TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR | Dc Components |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |