|
|
PDF LS013B7DH03 Data sheet ( Hoja de datos )
| Número de pieza | LS013B7DH03 | |
| Descripción | LCD Module | |
| Fabricantes | Sharp | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LS013B7DH03 (archivo pdf) en la parte inferior de esta página. Total 29 Páginas | ||
|
No Preview Available !
1 page  
SPEC No.
MODEL No.
LCP-1112045
LS013B7DH03
PAGE
3
(16) As this LCD module is composed electronic circuits, it is sensitive to electrostatic discharge of 200V or more.
Handle with care using cautions for the followings:
Operators
Operators must wear anti-static wears to prevent electrostatic charge up to and discharge from human
body.
Equipment and containers
Process equipment such as conveyer, soldering iron, working bench and containers may possibly
generate electrostatic charge up and discharge. Equipment must be grounded through 100Mohms
resistance. Use ion blower.
Floor
Floor plays an important role in leaking static electricity generated in human body or equipment. If the
floor is made of insulated material (such as polymer or rubber material), such static electricity may charge.
Proper measure should be taken to avoid static electricity charge (electrostatic earth: 100Mohms).There
is a possibility that the static electricity is charged to them without leakage in case of insulating floor, so
the electrostatic earth:1×108Ω should be made.
Humidity
Humidity in work area relates to surface resistance of the persons or objects that generate
electrostatics, and it can be manipulated to prevent electrostatic charge. Humidity of 40% or
lower increases electrostatic earth resistance and promotes electrostatic charging. Therefore,
the humidity in the work area should be kept above 40%. Specifically for film peeling process
or processes that require human hands, humidity should be kept above 50% and use
electricity removal blower.
Transportation/Storage
Containers and styroform used in transporation and storage may charge electrostatic (from friction and
peeling) or electrostatic charge from human body, etc. may cause containers and styroform to have
induced charge. Proper electrostatic measure should be taken for containers and storage material.
5 Page 
SPEC No.
MODEL No.
LCP-1112045
LS013B7DH03
PAGE
9
Recommended Circuit
COM signal serial input
EXTMODE=”L”
External COM signal input
EXTMODE=”H”
Figure 4-2 Recomended circuit
11 Page | ||
| Páginas | Total 29 Páginas | |
| PDF Descargar | [ Datasheet LS013B7DH03.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LS013B7DH01 | LCD Module | Sharp |
| LS013B7DH03 | Application Information for LCD Module | Sharp |
| LS013B7DH03 | LCD Module | Sharp |
| LS013B7DH05 | LCD Module | Sharp |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |