F-51167NCU-FW-AA Schematic ( PDF Datasheet ) - OPTREX CORPORATION

Teilenummer	F-51167NCU-FW-AA
Beschreibung	LCD Module
Hersteller	OPTREX CORPORATION
Logo
Gesamt 17 Seiten First Edition Approved by LCD Module Specification Aug 9, 2000 Final Revision ******** Checked by Checked by Type No. Ｆ－５１１６７ＮＣＵ－ＦＷ－ＡＡ Prepared by Production Div. Quality Assurance Div. Design Engineering Div. Production Div. Table of Contents 1. General Specifications ............................................................................ 2 2. Electrical Specifications.......................................................................... 3 3. Optical Specifications ............................................................................. 8 4. I/O Terminal.......................................................................................... 10 5. Test......................................................................................................... 12 6. Appearance Standards........................................................................... 13 7. Code System of Production Lot ......................................................... 15 8. Type Number ........................................................................................ 15 9. Applying Precautions............................................................................ 15 10. Precautions Relating Product Handling .............................................. 16 11. Warranty................................................................................................. 17 Rev. Date Revision History Page Comment F-51167NCU-FW-AA (AA) No.2000-0249 OPTREX CORPORATION OPTREX Page 1/17 2.6.Power Supply ON/OFF Sequence 2.6.1.ON Sequence SIGNAL VCC1,VCC2 0≦t SIGNAL DISPOFF 50 ms≦t LEVEL VCC1,VCC2 VSS VCC1 VSS VCC1 VSS 2.6.2.OFF Sequence LEVEL VCC1,VCC2 VSS VCC1 VSS VCC1 VSS 0≦t 200 ms≦t SIGNAL VCC1,VCC2 SIGNAL DISPOFF Please maintain the above sequence when turning on and off the power supply of the module. If DISPOFF is supplied to the module while internal alternate signal for LCD driving (M) is unstable, DC component will be supplied to the LCD panel. This may cause damage the LCD module. F-51167NCU-FW-AA (AA) No.2000-0249 OPTREX CORPORATION OPTREX Page 6/17 6 Page 5 . Te s t No change on display and in operation under the following test condition. No. Parameter 1 High Temperature Operating 2 Low Temperature Operating 3 High Temperature Storage 4 Low Temperature Storage 5 Damp Proof Test 6 Vibration Test 7 Shock Test Conditions 50℃±2℃, 96hrs (operation state) 0℃±2℃, 96hrs (operation state) 60℃±2℃, 96hrs -20℃±2℃, 96hrs 40℃±2℃, 90～95%RH, 96hrs Total fixed amplitude : 1.5mm Vibration Frequency : 10～55Hz One cycle 60 seconds to 3 directions of X, Y, Z for each 15 minutes To be measured after dropping from 60cm high on the concrete surface in packing state. Notes 3 4 3, 4 3, 4 5 E B Dropping method corner dropping F A corner : once GD C Edge dropping B,C,D edge : once A Face dropping 60cm Concrete Surface E,F,G face : once Note 1 : Unless otherwise specified, tests will be conducted under the following condition. Temperature : 20±5℃ Humidity : 65±5% Note 2 : Unless otherwise specified, tests will be not conducted under functioning state. Note 3 : No dew condensation to be observed. Note 4 : The function test shall be conducted after 4 hours storage at the normal temperature and humidity after removed from the test chamber. Note 5 : Vibration test will be conducted to the product itself without putting it in a container. F-51167NCU-FW-AA (AA) No.2000-0249 OPTREX CORPORATION OPTREX Page 12/17 12 Page
Seiten	Gesamt 17 Seiten
PDF Download	[ F-51167NCU-FW-AA Schematic.PDF ]

Link teilen

Besondere Datenblatt

Teilenummer	Beschreibung	Hersteller
F-51167NCU-FW-AA	LCD Module	OPTREX CORPORATION

Teilenummer	Beschreibung	Hersteller
CD40175BC	Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.	Fairchild Semiconductor
KTD1146	EPITAXIAL PLANAR NPN TRANSISTOR.	KEC