Datenblatt-pdf.com


SL05 Schematic ( PDF Datasheet ) - LGE

Teilenummer SL05
Beschreibung TVS Array
Hersteller LGE
Logo LGE Logo 




Gesamt 2 Seiten
SL05 Datasheet, Funktion
SL03-SL24
TVS Array Series
DESCRIPTION (300 watt)
This 3 pin ULTRA LOW CAPACITANCE TRANSIENT VOLTAGE
SUPPRESSOR is designed for use in applications where protection is
required at the board level from voltage transients caused by
electrostatic discharge (ESD) as defined by IEC 1000-4-2, electrical
fast transients (EFT) per IEC 1000-4-4.
This product provides unidirectional protection for 1 line by connecting
the Input/Output line to pin 1, pin 2 to common or ground and pin 3 (is
not connected). The SL03 thru SL24 product provides board level
protection from static electricity and other induced-voltage surges that
can damage sensitive circuitry.
These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays protect 3.0/3.3 Volt components such
as DRAM’s, SRAM’s, CMOS, HCMOS, HSIC, and low voltage interfaces up to 24 Volts. Because of the
physical size, weight and protection capabilities, this product is ideal for use in but not limited to
miniaturized electronic equipment such as hand held instruments, computers, computer peripherals and
cell phones.
FEATURES
Protects 3.0/3.3 up through 24V Components
Protects 1 Unidirectional line
Provides electrically isolated protection
SOT-23 Packaging
PACKAGING
Tape & Reel EIA Standard 481
7 inch reel 5,000 pieces
13 inch reel 10,000 pieces
MAXIMUM RATINGS
Operating Temperatures: -55ºC to +150ºC
Storage Temperature: -55ºC to +150ºC
SL03 thru SL24 have a Peak Pulse Power: 300 Watts
(8/20 µsec, Figure 1)
Pulse Repetition Rate: <.01%
MECHANICAL
Molded SOT-23 Surface Mount
Weight: .014 grams (approximate)
Body Marked with device number
ELECTRICAL CHARACTERISTICS @ 25ºC Unless otherwise specified
PART
NUMBER
SL03
SL05
SL12
SL15
SL24
DEVICE
MARKING
STAND
OFF
VOLTAGE
VWM
VOLTS
MAX
L03 3.3
L05 5.0
L12 12.0
L15 15.0
L24 24.0
BREAKDOWN
VOLTAGE
VBR
@1 mA
VOLTS
MIN
4
6.0
13.3
16.7
26.7
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
MAX
8
9.8
19
25
44
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
MAX
11
11
26
32
57
LEAKAGE
CURRENT
ID
@ VWM
µA
MAX
200
100
1
1
1
CAPACITANCE
@0V, 1 MHz
C
pF
MAX
5
5
5
5
5
TEMPERATURE
COEFFICIENT
OF VBR
áVBR
mV/ºC
MAX
-5
3
10
13
30
NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off Voltage VWM. Product
selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected.
http://www.luguang.cn





SeitenGesamt 2 Seiten
PDF Download[ SL05 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
SL02(SL02 - SL04) Small Surface Mount Schottky DiodesVishay Siliconix
Vishay Siliconix
SL03Transient Voltage Suppressor 300 WattMicro Commercial Components
Micro Commercial Components
SL03TVSarray SeriesMicrosemi Corporation
Microsemi Corporation
SL03TVS ArrayLGE
LGE
SL03(SL02 - SL04) Small Surface Mount Schottky DiodesVishay Siliconix
Vishay Siliconix

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche