Datenblatt-pdf.com


VLMB31J2L2-GS18 Schematic ( PDF Datasheet ) - Vishay

Teilenummer VLMB31J2L2-GS18
Beschreibung Standard SMD LED PLCC-2
Hersteller Vishay
Logo Vishay Logo 




Gesamt 7 Seiten
VLMB31J2L2-GS18 Datasheet, Funktion
www.vishay.com
VLMB31..
Vishay Semiconductors
Standard SMD LED PLCC-2
19225
DESCRIPTION
The package of the VLMB31..-series is the PLCC-2. It
consists of a lead frame which is embedded in a white
thermoplast. The reflector inside this package is filled up
with clear epoxy.
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
• Package: SMD PLCC-2
• Product series: standard
• Angle of half intensity: ± 60°
FEATURES
• SMD LED with exceptional brightness
• Luminous intensity categorized
• Compatible with automatic placement equipment
• EIA and ICE standard package
• Compatible with IR reflow, vapor phase
and wave solder processes according to
CECC 00802 and J-STD-020
• Available in 8 mm tape
• Low profile package
• Non-diffused lens: excellent for coupling to light
pipes and backlighting
• Low power consumption
• Luminous intensity ratio in one packaging
IVmax./IVmin. 1.6
• Preconditioning according to JEDEC® level 2 a
unit
• ESD withstand voltage: up to 2 kV according to
JESD22-A114-B
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Automotive: backlighting in dashboards and switches
• Telecommunication: indicator and backlighting in
telephone and fax
• Indicator and backlight for audio and video equipment
• Indicator and backlight in office equipment
• Flat backlight for LCDs, switches, and symbols
• General use
PARTS TABLE
PART
VLMB31J2L2-GS08
VLMB31J2L2-GS18
VLMB31K2L2-GS08
VLMB31K2L2-GS18
VLMB31J2K2-GS08
VLMB31J2K2-GS18
COLOR
Blue
Blue
Blue
Blue
Blue
Blue
LUMINOUS
INTENSITY
(mcd)
at IF
(mA)
MIN. TYP. MAX.
5.6 10 18 10
5.6 10 18 10
9 10.5 18 10
9 10.5 18 10
5.6 10 11.2 10
5.6 10 11.2 10
WAVELENGTH
(nm)
at IF
(mA)
MIN. TYP. MAX.
458 466 472 10
458 466 472 10
458 466 472 10
458 466 472 10
458 466 472 10
458 466 472 10
FORWARD
VOLTAGE
(V)
MIN. TYP. MAX.
at IF
(mA)
TECHNOLOGY
- 3.9 4.5 20 GaN on SiC
- 3.9 4.5 20 GaN on SiC
- 3.9 4.5 20 GaN on SiC
- 3.9 4.5 20 GaN on SiC
- 3.9 4.5 20 GaN on SiC
- 3.9 4.5 20 GaN on SiC
Rev. 1.7, 03-Aug-15
1 Document Number: 81621
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000






VLMB31J2L2-GS18 Datasheet, Funktion
www.vishay.com
BAR CODE PRODUCT LABEL (example)
106
A
H
VISHAY
37
BC D E F
G 20147
A. Type of component
B. Manufacturing plant
C. SEL - selection code (bin):
e.g.: P2 = code for luminous intensity group
3 = code for color group
D. Date code year / week
e. Day code (e.g. 2: Tuesday)
F. Batch no.
G. Total quantity
H. Company code
DRY PACKING
The reel is packed in an anti-humidity bag to protect the
devices from absorbing moisture during transportation and
storage.
Aluminum bag
Label
Reel
15973
FINAL PACKING
The sealed reel is packed into a cardboard box. A secondary
cardboard box is used for shipping purposes.
VLMB31..
Vishay Semiconductors
RECOMMENDED METHOD OF STORAGE
Dry box storage is recommended as soon as the aluminum
bag has been opened to prevent moisture absorption. The
following conditions should be observed, if dry boxes are
not available:
• Storage temperature 10 °C to 30 °C
• Storage humidity 60 % RH max.
After more than 672 h under these conditions moisture
content will be too high for reflow soldering.
In case of moisture absorption, the devices will recover to
the former condition by drying under the following condition:
192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air /
nitrogen)
or
96 h at 60 °C + 5 °C and < 5 % RH for all device containers
or
24 h at 100 °C + 5 °C not suitable for reel or tubes.
An EIA JEDEC standard JESD22-A112 level 2a label is
included on all dry bags.
CAUTION
This bag contains
MOISTURE –SENSITIVE DEVICES
LEVEL
2a
1. Shelf life in sealed bag 12 months at <40°C and < 90% relative humidity (RH)
2. After this bag is opened devices that will be subjected to infrared reflow,
vapor-phase reflow, or equivalent processing (peak package body temp.
260°C) must be:
a) Mounted within 672 hours at factory condition of < 30°C/60%RH or
b) Stored at <10% RH.
3. Devices require baking before mounting if:
a) Humidity Indicator Card is >10% when read at 23°C + 5°C or
b) 2a or 2b is not met.
4. If baking is required, devices may be baked for:
192 hours at 40°C + 5°C/-0°C and <5%RH (dry air/nitrogen)
or
96 hours at 60±5oCand <5%RH
For all device containers or
24 hours at 100±5°C
Not suitable for reels or tubes
Bag Seal Date: ______________________________
(If blank, see bar code label)
Note: LEVEL defined by EIA JEDEC Standard JESD22-A113
Example of JESD22-A112 level 2a label
19786
ESD PRECAUTION
Proper storage and handling procedures should be followed
to prevent ESD damage to the devices especially when they
are removed from the antistatic shielding bag. Electrostatic
sensitive devices warning labels are on the packaging.
VISHAY SEMICONDUCTORS STANDARD
BAR CODE LABELS
The Vishay Semiconductors standard bar code labels are
printed at final packing areas. The labels are on each
packing unit and contain Vishay Semiconductors specific
data.
Rev. 1.7, 03-Aug-15
6 Document Number: 81621
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

6 Page







SeitenGesamt 7 Seiten
PDF Download[ VLMB31J2L2-GS18 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
VLMB31J2L2-GS18Standard SMD LED PLCC-2Vishay
Vishay

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche