VLCS5130 Datasheet PDF - Vishay
| Part Number | VLCS5130 | |
| Description | High Brightness LED | |
| Manufacturers | Vishay | |
| Logo |  |
|
|
There is a preview and VLCS5130 download ( pdf file ) link at the bottom of this page. Total 5 Pages | ||
Preview 1 page No Preview Available !
www.vishay.com
VLCS5130
Vishay Semiconductors
High Brightness LED, Ø 5 mm Untinted Non-Diffused Package
19223
DESCRIPTION
The VLC.51.. series is a clear, non-diffused 5 mm LED for
high end applications where supreme luminous intensity
and a very small emission angle is required.
These lamps with clear untinted plastic case utilize the
highly developed ultrabright AlInGaP technology.
The very small viewing angle of these devices provide a very
high luminous intensity.
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
• Package: 5 mm
• Product series: power
• Angle of half intensity: ± 9°
FEATURES
• Untinted non-diffused lens
Available
• Utilizing ultrabright AllnGaP technology
• Very high luminous intensity
• Very small emission angle
• High operating temperature: Tj (chip junction
temperature) up to 125 °C for AllnGaP devices
• Luminous intensity and color categorized for
each packing unit
• ESD-withstand voltage: Up to 2 kV according
to JESD22-A114-B
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Interior and exterior lighting
• Outdoor LED panels, displays
• Instrumentation and front panel indicators
• Central high mounted stop lights (CHMSL) for motor
vehicles
• Replaces incandescent lamps
• Traffic signals and signs
• Light guide design
PARTS TABLE
PART
COLOR
VLCS5130
Red
LUMINOUS INTENSITY
(mcd)
MIN. TYP. MAX.
7500 25 000 -
at IF
(mA)
50
WAVELENGTH
(nm)
at IF
(mA)
MIN. TYP. MAX.
620 624 630 50
FORWARD VOLTAGE
(V)
MIN. TYP. MAX.
- 2.2 3.0
at IF
(mA)
50
TECHNOLOGY
AlInGaP on Si
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
VLCS5130
PARAMETER
Reverse voltage (1)
DC forward current
Surge forward current
Power dissipation
Junction temperature
Operating temperature range
Storage temperature range
Soldering temperature
Thermal resistance junction/ambient
TEST CONDITION
Tamb 85°C
tp 10 μs
t 5 s, 2 mm from body
SYMBOL
VR
IF
IFSM
PV
Tj
Tamb
Tstg
Tsd
RthJA
VALUE
5
50
0.1
150
125
- 40 to + 100
- 40 to + 100
260
300
Note
(1) Driving the LED in reverse direction is suitable for short term application
UNIT
V
mA
A
mW
°C
°C
°C
°C
K/W
Rev. 1.3, 25-Apr-13
1 Document Number: 81938
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
| |
 
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1 Document Number: 91000
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for VLCS5130 electronic component. |
| Information | Total 5 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ VLCS5130.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| VLCS5130 | The function is High Brightness LED. Vishay | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
VLCS
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||