|
|
Teilenummer | MBR40H100WTG |
|
Beschreibung | Switch Mode Power Rectifier | |
Hersteller | ON Semiconductor | |
Logo | ||
Gesamt 6 Seiten MBR40H100WTG
Switch Mode
Power Rectifier
100 V, 40 A
Features and Benefits
• Low Forward Voltage
• Low Power Loss/High Efficiency
• High Surge Capacity
• 175°C Operating Junction Temperature
• 40 A Total (20 A Per Diode Leg)
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Applications
• Power Supply − Output Rectification
• Power Management
• Instrumentation
Mechanical Characteristics:
• Case: Epoxy, Molded
• Epoxy Meets UL 94 V−0 @ 0.125 in
• Weight: 4.3 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
MAXIMUM RATINGS
Please See the Table on the Following Page
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
40 AMPERES
100 VOLTS
1
2, 4
3
1
2
3
TO−247
CASE 340AL
MARKING DIAGRAM
B40H100
AYWWG
© Semiconductor Components Industries, LLC, 2014
July, 2014 − Rev. 5
B40H100 = Specific Device Code
A = Assembly Location
Y = Year
WW = Work Week
G = Pb−Free Package
ORDERING INFORMATION
Device
Package
Shipping
MBR40H100WTG TO−247
(Pb−Free)
30 Units/Rail
1 Publication Order Number:
MBR40H100WT/D
MBR40H100WTG
PACKAGE DIMENSIONS
E2/2
NOTE 4
D
L
2X b2
NOTE 4
E
A
E2
NOTE 3
1 23
L1
NOTE 5
A
Q
c
b4
3X b
e 0.25 M B A M
TO−247
CASE 340AL
ISSUE A
B
SEATING
PLANE
A1
NOTE 7
0.635 M B A M
P NOTE 6
S
4
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. SLOT REQUIRED, NOTCH MAY BE ROUNDED.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH.
MOLD FLASH SHALL NOT EXCEED 0.13 PER SIDE. THESE
DIMENSIONS ARE MEASURED AT THE OUTERMOST
EXTREME OF THE PLASTIC BODY.
5. LEAD FINISH IS UNCONTROLLED IN THE REGION DEFINED BY
L1.
6. ∅P SHALL HAVE A MAXIMUM DRAFT ANGLE OF 1.5° TO THE
TOP OF THE PART WITH A MAXIMUM DIAMETER OF 3.91.
7. DIMENSION A1 TO BE MEASURED IN THE REGION DEFINED
BY L1.
MILLIMETERS
DIM MIN MAX
A 4.70 5.30
A1 2.20 2.60
b 1.00 1.40
b2 1.65 2.35
b4 2.60 3.40
c 0.40 0.80
D 20.30 21.40
E 15.50 16.25
E2 4.32 5.49
e 5.45 BSC
L 19.80 20.80
L1 3.50 4.50
P 3.55 3.65
Q 5.40 6.20
S 6.15 BSC
ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
http://onsemi.com
6
MBR40H100WT/D
6 Page | ||
Seiten | Gesamt 6 Seiten | |
PDF Download | [ MBR40H100WTG Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
MBR40H100WT | Schottky Barrier Rectifier ( Diode ) | Inchange Semiconductor |
MBR40H100WT | Power Rectifier | ON Semiconductor |
MBR40H100WT-F | High Performance Schottky Generation | Vishay Siliconix |
MBR40H100WTG | Switch Mode Power Rectifier | ON Semiconductor |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |