S4041-1B1 Datasheet PDF - Cypress Semiconductor
| Part Number | S4041-1B1 | |
| Description | 3.0V e.MMC Flash | |
| Manufacturers | Cypress Semiconductor | |
| Logo |  |
|
|
There is a preview and S4041-1B1 download ( pdf file ) link at the bottom of this page. Total 29 Pages | ||
Preview 1 page No Preview Available !
S4041-1B1
8 GB / 16 GB, 3.0 V e.MMC Flash
Features
■ e.MMC 4.51 Specification compatible
❐ Backward compatible with previous e.MMC specifications
■ Storage temperature
❐ 40 °C to +85 °C
■ Operating voltage
❐ VCCQ: 1.7 V - 1.95 V or 2.7 V - 3.6 V
❐ VCC: 2.7 V - 3.6 V
■ Density: 8/16 GB of data storage
■ Data bus width:
❐ SDR mode: 1 bit, 4 bit, 8 bit
❐ DDR mode: 4 bit, 8 bit
❐ HS200 mode: 4 bit, 8 bit
■ Clock frequency: 52 MHz, 200 MHz (e.MMC 4.51)
❐ SDR mode: up to 52 MHz
❐ DDR mode: up to 52 MHz
❐ HS200 mode: up to 200 MHz
■ BGA packages
❐ 153-ball VFBGA: 13 mm 11.5 mm 1.0 mm
❐ 100-ball LBGA: 18 mm 14 mm 1.4 mm
■ Operating temperature range
❐ Embedded: 25 °C to +85 °C
❐ Industrial: 40 °C to +85 °C
Key Supported Features
■ Boot Operation
■ Partition Management
■ Boot Area Partition
■ Replay Protected Memory Block (RPMB)
■ Sleep (CMD5)
■ Sanitize
■ Trim
■ High Priority Interrupt
■ Background Operations
■ Auto Background Operations
■ Hardware Reset
■ HS200
■ Health Monitoring
Performance
■ Sequential Read (MB/s): 120
■ Sequential Write (MB/s): 20
❐ Based on 16-GB device
❐ Bus in x8 I/O and HS200 modes
■ Random Read (IOPS): 5000
■ Random Write (IOPS): 1400
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 002-02760 Rev. *H
• San Jose, CA 95134-1709 • 408-943-2600
Revised March 03, 2016
|
| |
 
S4041-1B1
Table 1. Pin Description
Pin Name
Type
DAT0 - DAT7
CMD
CLK
I/O
I/O
Input
RST_N
VCC
VCCQ
Input
Power
Power
VDDI
VSS
VSSQ
Power
Power
Power
NC
RFU
—
—
Description
Bidirectional data channels used for data transfers
Bidirectional command channel used for device initialization and command transfers
Clock input
Hardware reset
Supply voltage for the flash memory
Supply voltage for the memory controller and MMC interface
Internal power node. Connect capacitor to ground.
Ground pin for the flash memory
Ground pin for the memory controller and MMC interface
Not connected
Reserved for future use. Do not connect.
Document Number: 002-02760 Rev. *H
Page 5 of 29
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for S4041-1B1 electronic component. |
| Information | Total 29 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ S4041-1B1.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| S4041-1B1 | The function is 3.0V e.MMC Flash. Cypress Semiconductor | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
S404
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||