|
|
Número de pieza | AH3362Q | |
Descripción | HIGH VOLTGAE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT UNIPOLAR SWITCH | |
Fabricantes | Diodes | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AH3362Q (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
No Preview Available ! Description
The AH3362Q is an AECQ100 qualified high voltage high sensitivity
Hall Effect Unipolar switch IC designed for position and proximity
sensing in automotive applications such as in seat and seatbelt
buckleL, steering lock/immobilisation, gear stick, transmission
actuator and gear position, HVAC compression, wiper, door/trunk
closure, etc. To support wide range of demanding applications, the
design has been optimized to operate over the supply range of 3.0V
to 28V. With chopper stabilized architecture and an internal bandgap
regulator to provide temperature compensated supply for internal
circuits, the AH3362Q provides a reliable solution over the whole
operating range. For robustness and protection, the device has a
reverse blocking diode with a Zener clamp on the supply. The output
has an over current limit and a Zener clamp.
The single open drain output can be switched on with South pole of
sufficient strength. When the magnetic flux density (B) perpendicular
to the package is larger than the operate point (BOP) the output is
switched on (pulled low) and is held on until magnetic flux density B is
lower than the release point (BRP). The output remains switched off
for North pole fields to or no magnetic fields.
The magnetic operating and release polarity is opposite for SOT23
and SC59 packages. The SOT23 and SIP-3 (Ammo Pack), SIP-3
(Bulk Pack) packages require south pole to the part marking side to
operate while SC59 requires south pole to the non-part marking side.
Features
• Unipolar Operation
• High Sensitivity: BOP and BRP of 30G and 20G Typical
• Single Open Drain Output with Over Current Limit
• 3.0V to 28V Operating Voltage Range
• Chopper Stabilized Design Provides
o Superior Temperature Stability
o Minimal Switch Point Drift
o Enhanced Immunity to Stress
• Good RF Noise Immunity
• Reverse Blocking Diode
• Zener Clamp on Supply and Output Pins
• -40C to +150C Operating Temperature
• ESD: HBM > 8kV, CDM: > 2kV
• AECQ100 Grade 0 Qualified
• Industry Standard SC59, SOT23 and SIP-3 (Ammo Pack), SIP-3
(Bulk Pack) Packages
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
AH3362Q
HIGH VOLTGAE HIGH SENSITIVITY
AUTOMOTIVE HALL EFFECT UNIPOLAR SWITCH
Pin Assignments
(Top View)
GND 2
3 OUTPUT
1 VDD
SC59 and SOT23
(Top View)
SIP-3 (Bulk Pack)
3. OUTPUT
2. GND
1. VDD
Applications
• Position and Proximity Sensing in Automotive Applications
• Seat Position
• Seatbelt Buckle
• Steering Lock / Immobilisation
• Gear Stick
• HVAC Compression
• Transmission Actuator
• Transmission Gear Position
• Wipers
• Sunroof and Windows
• Door/Trunk Closure
• Door Locks
• Contact-Less Switches
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.
AH3362Q
Document number: DS39174 Rev. 1 - 2
1 of 15
www.diodes.com
November 2016
© Diodes Incorporated
1 page Typical Operating Characteristics
Output Switch Operate and Release Points (Magnetic Thresholds) – BOPS and BRPS
AH3362Q
Supply Current
AH3362Q
Document number: DS39174 Rev. 1 - 2
5 of 15
www.diodes.com
November 2016
© Diodes Incorporated
5 Page Package Outline Dimensions (Cont.) (All dimensions in mm.)
(2) Package Type: SOT23
K1 K
H
A
All 7°
J
M
L
GAUGE PLANE
0.25
a
L1
CB
D
FG
AH3362Q
SOT23
Dim Min Max Typ
A 0.37 0.51 0.40
B 1.20 1.40 1.30
C 2.30 2.50 2.40
D 0.89 1.03 0.915
F 0.45 0.60 0.535
G 1.78 2.05 1.83
H 2.80 3.00 2.90
J 0.013 0.10 0.05
K 0.890 1.00 0.975
K1 0.903 1.10 1.025
L 0.45 0.61 0.55
L1 0.25 0.55 0.40
M 0.085 0.150 0.110
a 0° 8° --
All Dimensions in mm
Min/Max
Pin1
PART
MARKING
SURFACE
Hall Sensor
Die
1.4/1.5
Sensor Location
AH3362Q
Document number: DS39174 Rev. 1 - 2
11 of 15
www.diodes.com
November 2016
© Diodes Incorporated
11 Page |
Páginas | Total 15 Páginas | |
PDF Descargar | [ Datasheet AH3362Q.PDF ] |
Número de pieza | Descripción | Fabricantes |
AH3362Q | HIGH VOLTGAE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT UNIPOLAR SWITCH | Diodes |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |