Datenblatt-pdf.com


SP8K24FRA Schematic ( PDF Datasheet ) - ROHM Semiconductor

Teilenummer SP8K24FRA
Beschreibung 4V Drive Nch+Nch MOSFET
Hersteller ROHM Semiconductor
Logo ROHM Semiconductor Logo 




Gesamt 8 Seiten
SP8K24FRA Datasheet, Funktion
Transistor
4V Drive Nch+Nch MOSFET
SP8K244FRA
SP8SKP284KF2R4A
AEC-Q101 Qualified
zStructure
Silicon N-channel
MOSFET
zFeatures
1) Built-in G-S Protection Diode.
2) Small and Surface Mount Package (SOP8).
zApplications
Power switching , DC / DC converter , Inverter
zDimensions (Unit : mm)
SOP8
5.0
0.4
(8) (5)
1.75
1pin mark
(1)
1.27
(4)
0.2
Each lead has same dimensions
zPackaging dimensions
Package
Type
Code
Basic ordering unit (pieces)
SPSP8K8K242F4RA
Taping
TB
2500
zEquivalent circuit
(8) (7)
(6) (5) (8) (7) (6) (5)
2 2
(1) (2) (3) (4)
1 1
(1) (2)
(3) (4)
1 ESD PROTECTION DIODE
2 BODY DIODE
(1) Tr1 Source
(2) Tr1 Gate
(3) Tr2 Source
(4) Tr2 Gate
(5) Tr2 Drain
(6) Tr2 Drain
(7) Tr1 Drain
(8) Tr1 Drain
A protection diode is included between the gate and
the source terminals to protect the diode against static
electricity when the product is in use. Use the protection
circuit when the fixed voltages are exceeded.
zAbsolute maximum ratings (Ta=25°C)
<It is the same ratings for the Tr1 and Tr2.>
Parameter
Drain-source voltage
Gate-source voltage
Drain current
Continuous
Pulsed
Source current
(Body diode)
Continuous
Pulsed
Total power dissipation
Chanel temperature
Range of Storage temperature
*1 PW 10µs、Duty cycle 1%
*2 Mounted on a ceramic board
Symbol Limits
Unit
VDSS
45
V
VGSS
±20
V
ID ±6.0
A
IDP *1
±24
A
IS 1
A
ISP *1
24
A
PD *2
2
1.4
W / TOTAL
W / ELEMENT
Tch 150
Tstg -55 to +150
oC
oC
Rev.B
1/4






SP8K24FRA Datasheet, Funktion
Datasheet
Precautions Regarding Application Examples and External Circuits
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2. You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper
caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be
applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).
Precaution for Storage / Transportation
1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is
exceeding the recommended storage time period.
3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads
may occur due to excessive stress applied when dropping of a carton.
4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of
which storage time is exceeding the recommended storage time period.
Precaution for Product Label
QR code printed on ROHM Products label is for ROHM’s internal use only.
Precaution for Disposition
When disposing Products please dispose them properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act
Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign
trade act, please consult with ROHM in case of export.
Precaution Regarding Intellectual Property Rights
1. All information and data including but not limited to application example contained in this document is for reference
only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any
other rights of any third party regarding such information or data.
2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the
Products with other articles such as components, circuits, systems or external equipment (including software).
3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM
will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to
manufacture or sell products containing the Products, subject to the terms and conditions herein.
Other Precaution
1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
4. The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
Notice-PAA-E
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.001

6 Page







SeitenGesamt 8 Seiten
PDF Download[ SP8K24FRA Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
SP8K24FRA4V Drive Nch+Nch MOSFETROHM Semiconductor
ROHM Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche