|
|
Teilenummer | EE-SX4070 |
|
Beschreibung | Photomicrosensor | |
Hersteller | Omron | |
Logo | ||
Gesamt 2 Seiten Photomicrosensor (Transmissive)
EE-SX3070/-SX4070
Be sure to read Precautions on page 25.
■ Dimensions
Note: All units are in millimeters unless otherwise indicated.
Two, C1
Optical
axis
■ Features
• Incorporates an IC chip with a built-in detector element and ampli-
fier.
• Incorporates a detector element with a built-in temperature com-
pensation circuit.
• A wide supply voltage range: 4.5 to 16 VDC
• Directly connects with C-MOS and TTL.
• High resolution with a 0.5-mm-wide sensing aperture.
• Dark ON model (EE-SX3070)
• Light ON model (EE-SX4070)
■ Absolute Maximum Ratings (Ta = 25°C)
Two, 0.7
Five, 0.25
Five, 0.5
(13.8)
2.35±0.1
(1.25)
(1.25)
Internal Circuit
K
V
O
AG
Terminal No.
A
K
V
O
G
Name
Anode
Cathode
Power supply
(Vcc)
Output (OUT)
Ground (GND)
Two, 0.7±0.1 dia.
Unless otherwise specified, the
tolerances are as shown below.
Dimensions
3 mm max.
3 < mm ≤ 6
6 < mm ≤ 10
10 < mm ≤ 18
18 < mm ≤ 30
Tolerance
±0.3
±0.375
±0.45
±0.55
±0.65
Emitter
Item
Forward current
Reverse voltage
Detector
Power supply volt-
age
Output voltage
Output current
Permissible output
dissipation
Ambient tem- Operating
perature
Storage
Soldering temperature
Symbol
IF
VR
VCC
VOUT
IOUT
POUT
Topr
Tstg
Tsol
Rated value
50 mA
(see note 1)
4V
16 V
28 V
16 mA
250 mW (see
note 1)
–40°C to 75°C
–40°C to 85°C
260°C
(see note 2)
Note: 1. Refer to the temperature rating chart if the ambient temper-
ature exceeds 25°C.
2. Complete soldering within 10 seconds.
■ Electrical and Optical Characteristics (Ta = 25°C)
Emitter
Detector
Item
Symbol
Forward voltage
VF
Reverse current
IR
Peak emission wave-
length
λP
Low-level output voltage VOL
Value
1.2 V typ., 1.5 V max.
0.01 μA typ., 10 μA max.
940 nm typ.
0.12 V typ., 0.4 V max.
High-level output volt- VOH
age
Current consumption ICC
Peak spectral sensitivity λP
wavelength
LED current when output is OFF
IFT
LED current when output is ON
Hysteresis
ΔH
Response frequency
f
Response delay time
Response delay time
tPLH (tPHL)
tPHL (tPLH)
15 V min.
3.2 mA typ., 10 mA max.
870 nm typ.
10 mA max.
15% typ.
3 kHz min.
3 μs typ.
20 μs typ.
IF = 20 mA
VR = 4 V
IF = 20 mA
Condition
VCC = 4.5 to 16 V, IOL = 16 mA, IF = 0 mA (EE-SX3070),
IF = 10 mA (EE-SX4070)
VCC = 16 V, RL = 1 kΩ, IF = 10 mA (EE-SX3070),
IF = 0 mA (EE-SX4070)
VCC = 16 V
VCC = 4.5 to 16 V
VCC = 4.5 to 16 V
VCC = 4.5 to 16 V (see note 1)
VCC = 4.5 to 16 V, IF = 20 mA, IOL = 16 mA (see note 2)
VCC = 4.5 to 16 V, IF = 20 mA, IOL = 16 mA (see note 3)
VCC = 4.5 to 16 V, IF = 20 mA, IOL = 16 mA (see note 3)
120 EE-SX3070/-SX4070 Photomicrosensor (Transmissive)
| ||
Seiten | Gesamt 2 Seiten | |
PDF Download | [ EE-SX4070 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
EE-SX4070 | Photomicrosensor | Omron |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |