Datenblatt-pdf.com


240Di45 Schematic ( PDF Datasheet ) - OPTO22

Teilenummer 240Di45
Beschreibung Solid-State Relays
Hersteller OPTO22
Logo OPTO22 Logo 




Gesamt 23 Seiten
240Di45 Datasheet, Funktion
Solid-State Relays
Features
Rugged, epoxy encapsulation construction
4,000 volts of optical isolation
Subjected to full load test and six times the rated
current surge before and after encapsulation
Unique heat-spreader technology
Guaranteed for life
Opto 22 Power
Series SSR
improvements and the same 100% testing policy established
over 40 years ago, Opto 22 is still recognized today for the very
high quality and reliability of all our solid-state relays.
Overview
In 1974, Opto 22 introduced the first liquid epoxy-filled line of
power solid-state relays (SSR). This innovation in SSR design
greatly improved the reliability and reduced the cost of
manufacturing. At that time, we also incorporated into our
manufacturing process 100% testing under full load
conditions of every relay we produced.
By 1978, Opto 22 had gained such a reputation for reliability
that we were recognized as the world’s leading manufacturer
of solid-state relays. Through continuous manufacturing
Part Numbers
Part
Description
AC Switching
120A10
120A25
240A10
240A25
240A45
120D3
120D10
120D25
120D45
240D3
240D10
240Di10
240D25
240Di25
240D30-HS
240D45
240Di45
380D25
380D45
480D10-12
480D15-12
480D25-12
480D25-HS
480D45-12
120 VAC, 10 Amp, AC Control
120 VAC, 25 Amp, AC Control
240 VAC, 10 Amp, AC Control
240 VAC, 25 Amp, AC Control
240 VAC, 45 Amp, AC Control
120 VAC, 3 Amp, DC Control
120 VAC, 10 Amp, DC Control
120 VAC, 25 Amp, DC Control
120 VAC, 45 Amp, DC Control
240 VAC, 3 Amp, DC Control
240 VAC, 10 Amp, DC Control
240 VAC, 10 Amp, DC Control, with LED Indica-
tors
240 VAC, 25 Amp, DC Control
240 VAC, 25 Amp, DC Control, with LED Indica-
tors
240 VAC, 30 Amp, DC Control, with integrated
heatsink
240 VAC, 45 Amp, DC Control
240 VAC, 45 Amp, DC Control, with LED Indica-
tors
380 VAC, 25 Amp, DC Control
380 VAC, 45 Amp, DC Control
480 VAC, 10 Amp, DC Control, Transient Proof
480 VAC, 15 Amp, DC Control, Transient Proof
480 VAC, 25 Amp, DC Control, Transient Proof
480 VAC, 25 Amp, DC Control, Transient Proof,
with integrated heatsink
480 VAC, 45 Amp, DC Control, Transient Proof
Description
Opto 22 offers a complete line of SSRs, from the rugged 120/
240/380-volt AC Series to the small footprint MP Series,
designed for mounting on printed circuit boards. All Opto 22
SSRs feature 4,000 volts of optical isolation, and most are UL
and CSA recognized. The innovative use of room-temperature
liquid epoxy encapsulation, coupled with Opto 22’s unique
heat-spreader technology, are key to mass producing the
world’s most reliable solid state relays.
Every Opto 22 solid state relay is subjected to full load test and
six times the rated current surge both before and after
Part
Description
AC Switching
575D15-12
575D45-12
575D30-HS
575Di45-12
MP120D2
or P120D2
MP120D4
or P120D4
MP240D2
or P240D2
MP240D4
or P240D4
MP380D4
Z120D10
Z240D10
575 VAC, 15 Amp, DC Control, Transient Proof
575 VAC, 45 Amp, DC Control, Transient Proof
575 VAC, 30 Amp, DC Control, Transient Proof,
with integrated heatsink
575 VAC, 45 Amp, DC Control, Transient Proof,
with LED Indicators
120 VAC, 2 Amp, DC Control.
P model is low profile.
120 VAC, 4 Amp, DC Control.
P model is low profile.
240 VAC, 2 Amp, DC.
P model is low profile.
240 VAC, 4 Amp, DC.
P model is low profile.
380 VAC, 4 Amp, DC
Z Model, 120 VAC, 10 Amp, DC Control
Z Model, 240 VAC, 10 Amp, DC Control
DC Switching
DC60P or
DC60MP
DC200P or
DC200MP
DC60S-3
DC60S-5
60 VDC, 3 Amp, DC Control.
P model is low profile.
200 VDC, 1 Amp, DC Control.
P model is low profile.
60 VDC, 3 Amp, DC Control
60 VDC, 5 Amp, DC Control
Accessories
SAFETY COVER
SSR-HS
SSR-THERMOPAD
Power Series SSR safety cover
Power Series SSR heatsink
Thermal conductive pad (pack of 10)
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • [email protected]SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • [email protected]
© 2006–2017 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
1






240Di45 Datasheet, Funktion
480/575 Volt
Solid-State Relays
Model
Number
Nominal Nominal 1 cycle Nominal
AC Line Current Surge Signal Input
Voltage Rating (Amps) Resistance
(Amps) Peak (Ohms)
Signal
Pick-up
Voltage
Signal
Drop-
out
Voltage
Peak Maximum Off-State Operating I2t
Repetitive Output Leakage Voltage Rating
Voltage Voltage
(mA)
Range t=8.3
Maximum Drop Maximum** (Volts AC) (ms)
Isolation
Voltage
jc* Dissipation
(°C/Watt) (Watts/Amp)
480D10-12 480
10 110
1000
3VDC
1 VDC
(32V allowed)
1200
3.2 volts
11 mA 100–530 50 4,000VRMS 1.2
2.5
480D15-12 480
15 150
1000
3VDC
1 VDC
(32V allowed)
1200
3.2 volts
11 mA 100–530 50 4,000VRMS 1.2
2.5
480D25-12 480
25 250
1000
3VDC
1 VDC
(32V allowed)
1000
1.6 volts
11 mA 100–530 250 4,000VRMS 1.3
1.3
480D45-12 480
45 650
1000
3VDC
1 VDC
(32V allowed)
1000
1.6 volts
11 mA 100–530 1750 4,000VRMS 0.67
0.9
575D15-12 575
15 150
1000
3VDC
1 VDC
(32V allowed)
1200
3.2 volts 15 mA 100–600 90 4,000VRMS 1.2
2.5
575D45-12 575
45 650
1000
3VDC
1 VDC
(32V allowed)
1000
1.6 volts 15 mA 100–600 1750 4,000VRMS 0.67
0.9
575Di45-12 575
45 650
730
3VDC
1 VDC
1000
1.6 volts 15 mA 100–600 1750 4,000VRMS 0.67
(32V allowed)
0.9
Note: jc* = Thermal resistance from internal junction to base. Maximum internal junction temperature is 110 °C.
** Operating Frequency: 25 to 65 Hz (operates at 400 Hz with 6 times the offstate leakage)
Surge Current Data
Thermal Ratings
Time
Second
Time***
(Cycles)
10-Amp
Peak
Amps
15-Amp
Peak
Amps
25-Amp
Peak
Amps
45-Amp
Peak
Amps
0.017
1
110 150 250 650
0.050
3
85 140 175 420
0.100
6
70 110 140 320
0.200
12
60
90 112 245
0.500
30
50
70
80 175
1 60 40 55 67 134
2 120 33 49 53 119
3 180 32 47 49 98
4 240 31 43 47 95
5 300 30 40 45 91
10 600 28 35 42 84
Note: ***60 HZ
Mounted on a heat sink with
2 °C/watt rating
Mounted on a heat sink with
1 °C/watt rating
PAGE
6
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • [email protected]SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • [email protected]
© 2006–2017 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

6 Page









240Di45 pdf, datenblatt
Solid-State Relays
Dimensional Drawings
NOTE: All dimensions are nominal. We do not recommend
mounting the terminal side of a Power Series or Z series SSR to a
flat PCB (printed circuit board) or other flat surface, because there
may be some variation in terminal height or alignment from one
terminal to another and from one SSR to another.
MP series and P series are designed to mount on PCBs.
(+)
(+)
Side view: Part numbers DC60S3,
120D3, and 240D3 only
Side view: All other part numbers
(+) (+)
(+)
(+)
PAGE
12
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • [email protected]SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • [email protected]
© 2006–2017 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

12 Page





SeitenGesamt 23 Seiten
PDF Download[ 240Di45 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
240Di45Solid-State RelaysOPTO22
OPTO22

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche