|
|
Número de pieza | SKY13330-397LF | |
Descripción | 0.1-6.0 GHz SP2T Switch | |
Fabricantes | Skyworks Solutions | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SKY13330-397LF (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
No Preview Available ! DATA SHEET
SKY13330-397LF: 0.1-6.0 GHz SP2T Switch
Applications
• WCDMA band and mode switching
• Antenna switch for multimode systems
Features
• Broadband frequency range: 0.1 GHz to 6.0 GHz
• Low insertion loss:
− 0.35 dB @ 2.2 GHz
− 0.60 dB @ 6 GHz
• High IP1dB: +39 dBm
• No external DC blocking capacitors required
• Positive low control voltage range: 1.65 V to 2.70 V
• DC supply voltage: 2.3 V to 4.8 V
• Small, QFN (12-pin, 2 x 2 mm) package (MSL1, 260 °C per
JEDEC J-STD-020)
Figure 1. SKY13330-397LF Block Diagram
Description
The SKY13330-397LF is a CMOS, Silicon-On-Insulator (SOI)
Single-Pole, Double-Throw (SP2T) switch. The high linearity and
low insertion loss of the SKY13330-397LF make it an ideal choice
for WCDMA handset and data card applications.
The switch is a “reflective short” on the isolated port.
The SKY13330-397LF SP2T switch is provided in a compact Quad
Flat No-Lead (QFN) 2 x 2 mm package. A functional block diagram
is shown in Figure 1. The pin configuration and package are
shown in Figure 2. Signal pin assignments and functional pin
descriptions are provided in Table 1.
Figure 2. SKY13330-397LF Pinout – 12-Pin QFN
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201407C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 17, 2012
1
1 page Evaluation Board Description
The SKY13330-397LF Evaluation Board is used to test the
performance of the SKY13330-397LF SP2T Switch.
An Evaluation Board schematic diagram is provided in Figure 6.
An assembly drawing for the Evaluation Board is shown in
Figure 7.
Package Dimensions
The PCB layout footprint for the SKY13330-397LF is provided in
Figure 8. Typical case markings are shown in Figure 9. Package
dimensions for the 12-pin QFN are shown in Figure 10, and tape
and reel dimensions are provided in Figure 11.
DATA SHEET • SKY13330-397LF SP2T SWITCH
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
THE SKY13330-397LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 °C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Figure 6. SKY13330-397LF Evaluation Board Schematic
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201407C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 17, 2012
5
5 Page |
Páginas | Total 9 Páginas | |
PDF Descargar | [ Datasheet SKY13330-397LF.PDF ] |
Número de pieza | Descripción | Fabricantes |
SKY13330-397LF | 0.1-6.0 GHz SP2T Switch | Skyworks Solutions |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |