|
|
PDF VP2030b Data sheet ( Hoja de datos )
| Número de pieza | VP2030b | |
| Descripción | LCD Display Manual | |
| Fabricantes | ViewSonic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de VP2030b (archivo pdf) en la parte inferior de esta página. Total 24 Páginas | ||
|
No Preview Available !
ViewSonic®
VP2030b
LCD Display
1 page  
Compliance Information
For U.S.A.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use grounded power supply cord and the
cables which are included with the equipment or specified. Also, any unauthorized changes or
modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this device.
For Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
For European Countries
CE Conformity
The device complies with the requirements of the EEC directive 89/336/EEC as
amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic
compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to
“Safety.”
User Information for all Countries
Notice: Use the cables which are included with the unit or specified.
ViewSonic VP2030b
1
5 Page 
Wall Mounting (Optional)
To obtain a wall-mounting kit, contact ViewSonic® or your local dealer. Refer to the
instructions that come with the base mounting kit. To convert your LCD display from a desk-
mounted to a wall-mounted display, do the following:
Remove
four
screws
1. Verify that the Power button is turned Off,
then disconnect the power cord.
2. Lay the LCD display face down on a towel
or blanket.
3. Pull the back plate away from the head of
the LCD display. Let the plate hang on the
neck of the LCD display as shown on the
left. Notice the four screws.
4. Remove the four screws from the back plate.
5. Attach the mounting bracket from the VESA
compatible wall mounting kit (100 mm x
100 mm distance).
6. Attach the LCD display to the wall,
following the instructions in the wall-
mounting kit.
ViewSonic VP2030b
7
11 Page | ||
| Páginas | Total 24 Páginas | |
| PDF Descargar | [ Datasheet VP2030b.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| VP2030b | LCD Display Manual | ViewSonic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |