No Preview Available !
STPS30H100C
High voltage power Schottky rectifier
Features
■ Negligible switching losses
■ Low leakage current
■ Good trade off between leakage current and
forward voltage drop
■ Low thermal resistance
■ Avalanche capability specified
Description
Dual center tap Schottky rectifier suited for switch
mode power supplies and high frequency DC to
DC converters.
Packaged in TO-200AB, TO-220AB narrow leads,
TO-247,and I2PAK this device is intended for use
in high frequency inverters.
Datasheet − production data
A1
K
A2
A2
K
A1
TO-220AB
STPS30H100CT
A2
K
A1
TO-247
STPS30H100CW
A2
K
A1
TO-220AB narrow leads
STPS30H100CTN
A2
K
A1
I2PAK
STPS30H100CR
j
Table 1. Device summary
Symbol
Value
IF(AV)
VRRM
Tj (max)
VF(max)
2 x 15 A
100 V
175 °C
0.67 V
June 2012
This is information on a product in full production.
Doc ID 6347 Rev 8
1/10
www.st.com
10
STPS30H100C
2 Package information
Package information
● Epoxy meets UL94, V0
● Cooling method: by conduction (C)
● Recommended torque value: 0.4 to 0.6 N·m (TO-220AB), 0.55 N·m (TO-247)
● Maximum torque value: 1.0 N·m (TO-247)
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Table 5. TO-247 dimensions
Dimensions
Ref. Millimeters
Inches
Min. Typ. Max. Min. Typ Max.
S
D
L1
L
E
∅R
L2
b1
b2
123 b
e
A Heat-sink plane
∅P
c 321
A1 BACK VIEW
A 4.85
5.15 0.191
0.203
A1 2.20
2.60 0.086
0.102
b 1.00
1.40 0.039
0.055
b1 2.00
2.40 0.078
0.094
b2 3.00
3.40 0.118
0.133
c 0.40
D(1) 19.85
0.80 0.015
20.15 0.781
0.031
0.793
E 15.45
15.75 0.608
0.620
e 5.30 5.45 5.60 0.209 0.215 0.220
L 14.20
14.80 0.559
0.582
L1 3.70
4.30 0.145
0.169
L2 18.50 typ.
0.728 typ.
∅P(2) 3.55
3.65 0.139
0.143
∅R 4.50
5.50 0.177
0.217
S 5.30 5.50 5.70 0.209 0.216 0.224
1. Dimension D plus gate protrusion does not exceed 20.5 mm
2. Resin thickness around the mounting hole is not less than 0.9 mm
Doc ID 6347 Rev 8
5/10